By Greg Allan, tradesman and creator of Data First Coaching
Should an electrician add EV charger and battery work to the business?
Most electricians asking this question already know the demand is coming, since building code changes are mandating EV charger provisioning in new apartments and commercial builds. The real question is not whether to add EV chargers and batteries, but whether doing so actually lifts gross profit margin, or just adds turnover and overhead that never gets costed properly.
A switchboard upgrade, a mains cable feed and a load management add-on are not small extras tacked onto an EV charger unit. They are real labour and material cost. When that cost gets folded into a flat EV charger install price instead of being itemised and booked against the job, the business can look busier at the end of the month without being any more profitable than before it took the work on.
Why is EV charger and battery work becoming part of standard electrical compliance?
Compliance rules are shifting from optional to mandatory for EV provisioning in new residential and commercial builds, which changes what an electrician's standard fit-off now includes. A new apartment or commercial fit-out that once needed a switchboard sized for lighting, power points and general load now needs capacity built in for EV charging from day one, whether or not a charger goes in straight away.
For an electrician used to quoting switchboards, safety switches and power point layouts job by job, EV provisioning is no longer something to upsell after the fact. It is becoming part of the base compliance certificate on new work, in the same way smoke alarm requirements and data cabling allowances have become standard on certain jobs. An electrician who treats it as a bolt-on rather than a built-in cost risks under-quoting the switchboard work that now comes bundled with it.
What does an EV charger install actually cost beyond the unit itself?
An EV charger install is rarely just the unit on the wall. It usually needs a switchboard upgrade, a mains cable feed and, on sites close to their maximum demand, a load management add-on so the building does not trip out when everything runs at once. Every one of those steps is real labour and material cost that belongs on the job, not buried in overhead.
Battery installs follow the same pattern. A battery rarely stands alone: it often needs switchboard changes, extra circuits and coordination with existing solar, each adding time an apprentice or a licensed electrician has to spend on site. When that extra work gets quoted as part of a flat battery install fee instead of being broken out, the job can run longer than planned and the margin quietly disappears, even though the invoice total still looks fine.
How do you check whether EV and battery work is actually lifting your gross profit margin?
You check it the same way you check any other job: at the point of quoting, not after the invoice goes out. Before the price goes to the customer, run the margin calc on the switchboard upgrade, the mains feed and the load management work separately from the charger or battery unit itself, so you can see what each part of the job is really costing before you commit a price.
From there, build the quote out as options rather than a single number. A basic EV charger install can be one option, a charger with the switchboard upgrade a second, and a charger with the switchboard upgrade and a battery a third. Walk the customer through good, better and best based on what you actually found on site, and close with an install date booked in then and there, not a quote left sitting in an inbox.
How do you know if a customer actually wants EV or battery work, or if you are just chasing a trend?
You find out by asking what the customer is actually trying to solve before you recommend EV or battery work. Some customers want it for cost savings on power bills, others want it for safety during outages, and some simply need it because the building code now requires provisioning on their fit-out, which changes what you should recommend and why.
Recommending EV or battery work because it is trending is a different decision to recommending it because the customer standing in front of you already needs it. An electrician who asks first, and only recommends the work that solves what the customer actually wants, tends to book jobs that fit the crew and the margin, rather than jobs chased because EV and battery work sounds like the next growth area in electrical work.
How can AI agents help you capture the real cost of every EV and battery job?
An AI agent is software that does a piece of office work the way you would do it yourself, using your prices, your wording and your rules. For EV and battery work, an agent can take the intake from a new enquiry, the house type, the job details and the site conditions, and line it up against what a switchboard upgrade usually costs, so nothing gets missed before a price goes out.
Picture an electrician who wanted to grow the EV charger side of the business but had never run paid advertising and had no easy way for a prospect to get a quote online. The business builds a website with an interactive EV charger quote tool, where a prospect enters their house type, postcode and job details, and runs its first paid ad campaign pointing people to that tool. AI agents sitting behind that tool can turn those answers into a properly scoped job, with the switchboard and load management work already flagged, instead of a rough number cleaned up later. Data first, the business can see which of those enquiries turn into booked, profitable jobs and which ones quietly eat the margin.
How does Data First Coaching approach this?
Data First Coaching, built by Greg Allan, starts from the electrician's own job and finance data through the Trade Business Intelligence, not from a conversation about how busy EV and battery work seems. It looks at what gross profit margin EV charger and battery jobs are actually running against switchboard and fit-off work, and where in the quoting process the extra cost is getting missed. Greg puts it plainly: “you put a last EBO in your switchboard, a mains coke, a cable feed”, and that is the kind of cost his approach checks gets captured, not absorbed. The how of building that into an electrician's own systems is worked through inside the Academy, with members, because the Trade Business Intelligence is powered by every member who is open minded, innovative and willing to share.
Looking for a business coach who starts from your numbers? Electrician Business Coach or every answer for electricians.

