Articles / Plasterers

How do I run plastering crews across several sites without it costing me money?

Running plastering crews across several sites comes down to one number before it comes down to a roster: the gross profit margin each site is actually running at, measured against what the crew took on the ground, not what the owner would have taken swinging the trowel themselves. That figure, read from the job's own data rather than memory, shows whether the quote was ever built for a crew at all.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

  • Data first coaching
  • Your nights back
  • Every job priced to make money
  • 9,000+ owners trained
  • Greg is the only coach
  • 20 years in trade, 10 coaching
  • Beat 9pm
  • Places are limited
Greg on videoOperational time freedom means the business runs with zero notice

By Greg Allan, tradesman and creator of Data First Coaching

Why does a job that was profitable with me on the tools lose money once a crew runs it instead?

Most plastering quotes are built on a square metre rate or a day rate the owner worked out from their own pace, sheeting, setting and stopping as fast as they personally work. A crew paid by the hour, working at a normal employed pace on the same ceiling, the same cornice run, the same patching job, simply takes longer, and the margin that rate was priced on disappears before the job is even half sanded.

This is not a scheduling problem dressed up as a pricing problem. It is the other way round. A plasterer who has only ever quoted off their own speed has never actually tested what the job costs when somebody else runs it, and growth is usually the first time that gap gets exposed, on a real site, with a real builder waiting on the handover.

The job's own numbers, the actual hours a crew took against what the quote assumed on that bulkhead, that square set, that run of fire rated sheeting, are the only honest answer. Memory of how a job "normally goes" is almost always memory of how the owner does it personally, not how the crew does it.

Why do the same problems keep turning up on different sites with different crews?

When the same issue, a bulkhead built to the wrong line, a cornice mitre that is off, stopping rushed before drying time was up, keeps showing up across different sites with different people on them, that is rarely bad luck with the crew. It is usually a sign the business is missing a system that should have caught the problem before the crew moved past that stage.

Plastering runs on drying time between coats, which means crews are often moving between two or three sites in a day, chasing the next coat, the next ceiling, the next room ready for cornice. Builders paying late and sites running behind only adds more pressure to a day that already has no slack in it.

Fix the system and the same mistake stops repeating on the next job. Blame the crew and the business just gets to find out about it again on the next site, usually from a builder who is not happy about it.

How do you price plastering jobs so the margin holds once a crew, not you, is running the site?

You start by checking the gross profit margin a job is actually running at, tracked against what the crew took on the ground, not what the quote assumed when it was written. A data first view of each site, read job by job rather than guessed from memory, tells you whether your square metre rates and day quotes are still built around your own hands or around what an employed crew genuinely delivers.

That is the number worth protecting and growing, not a one-off figure checked once at quoting time and forgotten. Once you can see it per site, you can reprice the next quote before the loss happens, instead of finding out from the bank account weeks later.

How do you find out what's going wrong on a site before it becomes a bigger problem?

You need a way for problems on site to reach you the moment they happen, not at the end of the day when the crew has packed up and moved on. AI agents, software that does a job the way you would, with your prices, your wording and your rules, can sit in that gap and get the right information back to you before the job moves on to the next stage.

Picture a plasterer running two sites at once, a renovation patching job on one side of town and a new build sheeting job on the other, tired of only hearing about a site problem when the builder rang to complain. He built his own tool for the crew to use on site: when a sheeter or stopper flags something, a bad stud, a wet patch, a ceiling that will not take a fixing where the plan says it should, it comes straight through as a text to his phone. The information moves the moment it happens, while there is still time to fix it cheaply, instead of after the next coat has gone on over the top of it.

How do you make sure a new sheeter or stopper works to your standard, not just their own?

A new hand on the tools rarely arrives sheeting, setting or stopping to the standard an owner has built up over years of running their own trowel, even when the skill is right there on their CV. Spelling out what good sheeting, good stopping and a proper square set look like before someone starts on a site is what protects the standard, not assuming it will just turn up.

This matters more, not less, once crews are spread across several sites, because there is no owner walking past to catch it early. The standard has to travel with the crew, not with the owner.

When does it make sense to bring in someone to run sites, rather than running them yourself?

Once you are full time on the phone, chasing builders, juggling drying time between coats across two or three sites and sorting crew problems instead of quoting or being on the tools, the next hire that breaks that ceiling is an ops manager, not another plasterer. An ops manager takes on the scheduling, the site communication and the project management, so the crew already on the books can keep sheeting, setting and stopping without every problem running through you first.

AI agents can also take on the non-billable side of this, chasing crew for updates and chasing builders for sign-off, the work that quietly eats the day once sites multiply, well before the business is ready to carry the cost of a full time ops manager.

How does Data First Coaching approach this?

Data First Coaching starts from what a plasterer's own job data actually shows: the gross profit margin each site is running at right now, against what the crew took on the ground, not what the quote assumed. Through the Trade Business Intelligence, that is read alongside what has been learned coaching plastering businesses, so it is clear whether the problem sits in the pricing, the system, or a standard a new hand was never given. As Greg Allan puts it, “You shouldn't be losing as a result of hiring someone.” The how, the systems and the builds that fix it are worked through inside the Academy, with members who are open minded, innovative and willing to share, because the Trade Business Intelligence is powered by every member.

Looking for a business coach who starts from your numbers? Plasterer Business Coach or every answer for plasterers.

Also asked

More questions owners ask.

Should I just charge builders more once I'm running multiple plastering crews?

Not as a blanket rule. A flat increase can still leave some jobs losing money and others overpriced. Checking the gross profit margin site by site shows which jobs genuinely need repricing because of crew pace, and which were fine to begin with.

How many sites can one plasterer realistically run at once?

There is no fixed number that fits every plastering business, because it depends on drying time between coats, how far apart the sites are and how much the crew can be trusted to flag problems without the owner there. The honest answer comes from the business's own data, not a rule of thumb.

Is it the crew's fault if a job that was profitable with me on it loses money once they run it?

Usually not. If the quote was built on the owner's own speed sheeting and setting, an employed crew working at a normal pace was never going to hit that number. The fix sits in the pricing and the system, not in blaming the people doing the work.

What should I check before trusting a new stopper or sheeter on a site without me there?

Check whether what you consider good sheeting, stopping and square setting has actually been spelled out to them, rather than assumed from their CV. A skill listed on paper is not the same as a standard demonstrated on your site, under your name.

Data First Coaching

The Plasterer Business Coach Who Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.