Articles / Roofers

How do I price jobs as a roofer so the margin actually holds?

A roofer prices a job properly by costing every part of it separately, tear-off, sarking, flashing, ridge capping, guttering and scaffold, then checking what the blended result does to gross profit margin before the quote goes out, not after the job is done. A single lump sum price hides which part of a re-roof or restoration is actually losing money, and that is why busy seasons can still leave a roofer worse off.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

  • Data first coaching
  • Your nights back
  • Every job priced to make money
  • 9,000+ owners trained
  • Greg is the only coach
  • 20 years in trade, 10 coaching
  • Beat 9pm
  • Places are limited
Greg on videoI invented a pricing system at the Woolworths checkout

By Greg Allan, tradesman and creator of Data First Coaching

Why does a re-roof quote that looked fine on paper still lose money?

Because a re-roof is never one job, it is several jobs stacked together, and pricing it as a single number blends them into a figure that looks fine and isn't. Tear-off is almost all labour. Sheeting, sarking, flashing and ridge capping are material heavy. Guttering, downpipes and valley work sit somewhere in between, and scaffold or edge protection for height safety sits over the top of all of it at its own hire cost. When a roofer prices the whole restoration as one lump sum, the parts that run over quietly eat into the parts that were meant to carry the margin.

Most roofers also price from their own speed on the tools, not from what the crew actually does on site. A tile to metal re-roof might take the owner a certain number of hours because they have done hundreds of them. The apprentice or the subbie doing the tear-off and the flashing on a Tuesday afternoon will not match that. A quote built on the owner's own efficiency looks accurate right up until it is handed to the team, and then it erodes a little on every job without ever showing up as one obvious mistake.

Why does storm season make pricing even harder for a roofer?

Because storm season brings real demand, urgent leak repairs and insurance work where the client wants someone on the roof now, and that pressure pushes roofers towards discounting out of guilt rather than pricing properly. A roof inspection after a storm, a tarp and a temporary repair, then a full restoration quote to follow, all carry genuine urgency cost. Scaffold and crew availability tighten, suppliers can lift prices on sheeting with little notice, and a roofer trying to get through the backlog can end up quoting fast and bleeding margin slowly, job after job, without noticing until the season is over.

A roofer who treats a weather day as lost time rather than a cost that needs to be priced for across the busy months often finds the quiet months cannot make up what storm season gave away. The pricing has to hold its ground precisely when the phone will not stop ringing, not loosen because the work is plentiful.

What number actually tells a roofer if a quote will hold its margin?

The number that matters is the blended gross profit margin across the whole job, not the total price and not any single line item on its own. A quote can show a strong headline figure for a tile to metal re-roof and still carry a tear-off line priced under true labour cost, or a scaffold hire line that has not moved since the last price rise. The blended margin is what shows whether the job as a whole clears the gap between what it costs to run and what the business needs to keep.

This is why pricing from memory or from last year's job sheet is risky for a roofer. Material and labour costs on a re-roof move often, a sheeting supplier lifts prices, a scaffold hire rate goes up, and a quote that was accurate three months ago can be quietly wrong today. The business's own current job costs, checked regularly rather than set once, are what tell the truth when a feeling about the price does not.

How do AI agents help a roofer price a job properly?

An AI agent is software that does a piece of work the way the owner would do it, using their own prices, their own wording and their own rules, and for pricing that means it can hold every line of a re-roof, tear-off, sarking, flashing, ridge capping, guttering and scaffold, as its own pre-priced item rather than one blurred total. That stops a complex restoration quote from hiding where the real cost sits, because each part is priced to what it actually costs this business to deliver, not averaged into a number that feels about right.

Picture a roofer who sent off a quote for a large tile to metal re-roof and heard nothing back from the client. Using an AI agent, he rebuilt the proposal so it laid out the job the way the client could actually follow it, the tear-off, the sheeting and flashing, the ridge capping, the guttering, the scaffold, each shown and priced on its own, instead of one number sitting at the bottom of a page. He resent it. A data first approach to pricing works the same way on every job, not just the ones that stall: the quote shows the client what they are buying, and it shows the roofer where the margin actually sits.

Should a roofer price insurance and storm work differently to a normal re-roof?

Yes, because insurance work and storm surge jobs carry urgency and demand that a quiet month job does not, and pricing them the same as everyday work means giving that demand away for nothing. The same breakdown applies, tear-off, sarking, flashing, ridge capping, guttering, scaffold, but the review has to happen more often in storm season because costs move fastest exactly when the roofer has least time to check them.

AI agents can hold that pricing steady under pressure, applying the business's current rules and current costs to every insurance quote and every urgent leak repair the same way, so a roofer rushing between jobs is not pricing from memory on the busiest day of the year.

How does Data First Coaching approach this?

Data First Coaching starts from the roofer's own job costing, through the Trade Business Intelligence, to see where a quoted price and the actual cost of tear-off, materials, flashing and scaffold have drifted apart, rather than starting from a conversation about what the owner thinks is happening. As Greg Allan puts it, “one of the biggest mistakes we see people make is they price it around themselves doing it”, and the data usually shows exactly where that habit is sitting. The how, the pricing structure and the systems that hold it, is worked through inside the Academy, with members, because the Trade Business Intelligence is powered by every member and built for owners who are open minded, innovative and willing to share what they learn.

Looking for a business coach who starts from your numbers? Roofer Business Coach or every answer for roofers.

Also asked

More questions owners ask.

Should a roofer charge the same rate for insurance work as for a private re-roof?

Insurance work still needs to clear the same blended margin as any other re-roof, but it often carries extra time for documentation, scope checks and roof inspections that a straight private job does not, so that time has to be priced in rather than absorbed as goodwill.

How often should a roofer actually check their pricing?

Often enough that a sheeting price rise or a higher scaffold hire rate gets caught before it sits quietly inside every quote for a season. Pricing set once and left is the most common way margin disappears without a roofer noticing.

Does breaking a quote into separate line items make it harder for the client to understand?

Done well it does the opposite. A client shown tear-off, sarking, flashing, ridge capping and guttering as separate priced items can see what they are paying for, which often builds more trust than a single total they have to take on faith.

Why do two roofers quoting the same re-roof end up with such different totals?

Usually because one is pricing from their own speed and efficiency and the other is pricing from what the job genuinely costs to run with the crew they actually have, including weather days, scaffold and edge protection.

Data First Coaching

The Roofer Business Coach Who Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.