Articles / Plumbers

How do I price jobs as a plumber?

A plumber prices well by pricing the job item by item, not by the hour, so a hot water replacement, a tap change or a full bathroom renovation each carries its own labour, materials and margin. This stops a customer comparing an hourly rate against the next quote. The number that actually matters is the blended margin across the whole job, because a few strong lines can hide a few weak ones until the bank balance tells a different story to the quote.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

  • Data first coaching
  • Your nights back
  • Every job priced to make money
  • 9,000+ owners trained
  • Greg is the only coach
  • 20 years in trade, 10 coaching
  • Beat 9pm
  • Places are limited
Greg on videoI invented a pricing system at the Woolworths checkout

By Greg Allan, tradesman and creator of Data First Coaching

How should a plumber price a job?

A plumber prices well by pricing each item in the job separately, with labour, materials and markup already built in, rather than quoting a rate per hour. A hot water unit, a tap, a toilet, a rough-in and a fit-off each get their own price. There is no hourly rate left for a customer to hold up against the next plumber's quote, because the number simply does not exist in that form.

This matters because a customer ringing around for quotes on a bathroom renovation or a blocked drain is almost always comparing the one number every plumber gives out: the rate. Item pricing takes that number off the table entirely, so the comparison has to move to the actual work, not the wage.

Why does quoting an hourly rate lose the job before the plumber has even started?

Most owners who quote a rate per hour are handing the customer the easiest possible way to shop them against the next call. The rate is one number, it is simple to write down, and it is simple to compare, so the decision can be made before the plumber has explained anything about the job.

A burst pipe at eleven at night or a blocked drain backing up into a laundry does not care what the rate is, the customer just wants it fixed. But a bathroom renovation quote, a gas fitting job or a strata maintenance contract renewal gets compared on rate every time, and a plumber who leads with the rate has already put themselves in a line-up with every other plumber in the area.

Why can a quote total look profitable when some lines are actually losing money?

A plumber who prices a job line by line, hot water unit, tap, toilet, rough-in, fit-off, can have some lines paying well and others losing money, and never know it, because the business only ever looks at the total on the quote. The total can look fine while individual items are bleeding margin underneath it.

This is how a job can be quoted, invoiced, paid, and still leave the owner wondering where the money went. A compliance certificate line might be priced to cover the paperwork and the backflow test, but if the toilet or tap lines underneath it are priced on an old price list, the loss on those lines quietly eats the profit the certificate line was meant to protect.

How do you price items so an apprentice running the job doesn't lose money on it?

You price every item for the time and materials an average tradesperson in the business needs, not the fastest person on the tools. If the price list is built around the most efficient plumber in the business, it looks right on paper and loses money the moment an apprentice or a newer employee runs that same job.

This is where AI agents, software that does a piece of office work the way you would, using your prices, your wording and your rules, can hold the price list steady across every job sheet, every maintenance contract renewal with a strata manager or property manager, and every quote going out, regardless of which tradesperson on the crew is doing the pricing that week.

Picture a plumber whose pricing had been set job by job for years, varying between a homeowner, a builder and a property manager, with the rates never quite where they needed to be. Moving to one fixed price list across every type of customer, including builders, with a proper rate increase built in, and reviewing the cost of running the business every quarter instead of once a year, changes what the quote total is actually telling the owner.

What happens if the price list isn't reviewed when supplier costs or wages move?

A price list is not a one-off build, it is something that needs reviewing as supplier costs and wage rates move. If a hot water unit, a tap fitting or the materials for a backflow test go up and the price list is not updated, that increase comes straight off the plumber's margin without anyone noticing, job after job.

AI agents can sit across supplier invoices and the price list, flagging where a cost has moved since the price was last set, so the owner is working from a current picture rather than a list built a year or two ago. This is data first thinking: the price list is only ever as good as the data behind it, and that data changes every time a supplier price goes up or an award rate moves.

How does Data First Coaching approach this?

Data First Coaching starts from the plumber's own numbers, through the Trade Business Intelligence, looking at the blended margin across whole jobs rather than the total on a single quote. That is often where the real problem sits: not the quote itself, but which items inside it are quietly losing money.

Greg Allan built this from running his own trade business, and teaches that when a price moves and nobody notices, “that directly comes off of your profit margin.” The how, building and reviewing a price list that protects margin across every job type, is worked through inside the Academy, with members, because the Trade Business Intelligence is powered by every member who is open minded, innovative and willing to share what they learn.

Looking for a business coach who starts from your numbers? Plumber Business Coach or every answer for plumbers.

Also asked

More questions owners ask.

Should a plumber price strata maintenance contracts differently to one-off jobs?

The items are still priced the same way, labour, materials and markup built in, but a maintenance contract adds a volume of recurring callouts and compliance certificates that need their own line, so the blended margin across the whole contract still needs checking, not just the headline rate.

How often should a plumber update their price list?

Often enough that a supplier price rise or a wage movement never sits unnoticed for long. Treat the price list as something reviewed on a regular cycle, not a one-off build, because every missed update comes straight off the margin.

Does item pricing work for emergency callouts like a burst pipe at night?

Yes. An emergency callout can still be priced as items, the callout itself, the repair, any parts, each carrying its own margin, rather than a rate per hour that invites the customer to compare you against the next plumber they ring.

How does a plumber know if a bathroom renovation quote is actually profitable?

Not from the total on the quote. The blended margin across every item, tap, toilet, hot water unit, rough-in and fit-off, is the number that shows whether the job banked what the quote suggested it would.

Data First Coaching

The Plumber Business Coach Who Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.