Articles / Carpenters

How should a carpenter price jobs to protect their margin?

A carpenter protects their margin by pricing every job, whether it is a day rate for a builder, a fixed-price deck or an itemised fit-out, as its own priced list of labour, materials and hardware, never as one blanket markup percentage. Blended markups hide where the actual profit sits, so the carpenter's own job data, checked regularly, is what shows whether a quote is still making money once timber and hardware prices move.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

Greg on videoStop losing jobs to hourly rate comparisons

By Greg Allan, tradesman and creator of Data First Coaching

Why does a carpenter's pricing look fine on paper but still lose money?

Most carpenters price in more ways than almost any other trade. A day rate for a builder on one job, a fixed price for a deck or pergola on the next, then a fit-out broken into labour, timber and hardware lines on the one after that. On paper, with one markup sitting over the top of everything, the business can look busy and profitable while the real margin is quietly disappearing underneath.

The problem is that materials, travel between small jobs, and labour get bundled differently on every single job type. A subcontract day rate carries almost none of the material risk a fixed-price renovation does. A small fix-out with skirting, architrave and door hanging eats far more travel time relative to its value than a full week of framing on one site. When all of that gets squashed into one markup figure, the carpenter cannot see which jobs are actually paying and which ones are being carried by the others.

Why does one markup percentage not work across day rates, decks and fit-outs?

A single markup percentage treats every job as if it has the same mix of labour, materials and risk, and a carpentry business almost never does. The markup that works on a straightforward deck can quietly lose money on a fiddly fit-out, because the number on the quote never changes even though what sits underneath it has.

A carpenter charging a day rate to a builder is really selling time, with the builder carrying most of the material risk. A fixed-price pergola or deck means the carpenter is carrying timber, hardware and fixings as well as labour, and small jobs that eat travel time between sites chip away at margin that a flat markup never accounts for. Timber and hardware prices also move often, sometimes between one quote and the next, so a price list that was accurate a season ago can be wrong now even though the markup written on it looks the same.

What should a carpenter price job by job instead of a blanket markup?

Pricing each part of a job as its own priced item, with labour, materials and markup bundled into that line, means nothing gets left off the quote and the price stands up when a client or a builder questions it. It also means a fix-out, a deck and a fit-out can each carry the margin they actually need rather than sharing one average figure that suits none of them.

This matters most on the jobs carpenters price around themselves without realising it. A quote built on what the most efficient chippy on the crew could knock out runs short the moment it is handed to an apprentice or a second-year, because the materials and time were never really priced for the job, they were priced for the person. Pricing around what an average tradesperson or apprentice actually needs in time and materials protects the margin no matter who ends up on site.

Picture a carpenter whose quoting has always been slow and manual, built fresh each time from memory. With so many parts to a job, from the stud wall through to the last fixing, small materials like brackets and post caps get left off the quote and then turn up missing on site, costing a trip to the hardware store and a chunk of the day. A quoting checklist built for each type of job, covering every material down to the brackets and the posts, closes that gap before the job ever starts.

How do you check gross profit margin at the moment of quoting, not at tax time?

You check gross profit margin while you are still building the quote, line by line, not when the invoice is finally raised or the books are done at the end of the month. By the time a carpenter is looking at margin in the accounts, the job is finished and whatever was lost on timber, hardware or an underpriced day rate is already gone.

This is where your own job data matters more than a feeling about how a job went. A deck that felt like a good earner can be sitting on a thinner margin than a day rate job that felt ordinary, once travel, offcuts and the real hours an apprentice took are counted in. Checking margin at the point of quoting, and presenting the client with a good, better, best option that ends in a booked date rather than a price left sitting in an inbox, protects the number before the job starts rather than explaining it after.

How do AI agents fit into pricing for a carpentry business?

AI agents can take over the slow, repetitive part of pricing, building out the itemised quote from a checklist built around the job type, so nothing gets missed and the carpenter is not starting from a blank page every time. An AI agent is simply software that does a job the way the owner would do it, using their prices, their wording and their rules, not a generic calculator built for every trade.

This is data first thinking applied to quoting. Instead of a carpenter guessing at a price from memory or copying the last similar job, AI agents can hold the current timber and hardware rates, the checklist for that job type, and the carpenter's own markup rules, and build the quote from there. Where the job data shows a job type or a client keeps running thin, that is where the problem actually starts, and that is where the next quote needs to change, not just the markup on paper.

How does Data First Coaching approach this?

Data First Coaching, built by Greg Allan, starts from the carpenter's own job data through the Trade Business Intelligence rather than from a general rule about markups. It looks at which job types, which clients and which pricing methods, day rate, fixed price or itemised, are actually protecting margin and which ones only look like they are, so the fix goes in where the problem really starts. As Greg puts it, “one of the biggest mistakes we see people make is they price it around themselves doing it.” The how, the checklists, the agents and the pricing systems, is worked through inside the Academy, with members, because the Trade Business Intelligence is powered by every member for every member, and that only works with owners who are open minded, innovative and willing to share.

Looking for a business coach who starts from your numbers? Carpenter Business Coach or every answer for carpenters.

Also asked

More questions owners ask.

Should a carpenter use the same markup on materials and labour?

Not if the job mix varies. A deck or fit-out carries material risk a day rate subcontract does not, so one blended markup across both can quietly undercharge the fixed-price jobs while overcharging the day rate work, which can cost the carpenter future builder jobs.

How often should a carpenter update their price list?

Often enough that it reflects current timber and hardware costs, not what they were when the list was first built. Prices move regularly, and a list left untouched erodes margin even though the markup written on it never changes.

Does pricing around an apprentice instead of the best tradesperson cost more?

It protects the quote rather than costing more. A price built around the fastest person on the tools runs short the moment an apprentice or a less experienced chippy is handed the job, and that shortfall comes straight off the margin.

Can a carpenter price a renovation the same way as a new deck?

Not exactly. A renovation often carries more unknowns, access issues, and existing structure to work around, so it needs its own itemised pricing rather than being squeezed into a template built for a straightforward new-build deck or pergola.

Data First Coaching

The Carpenter Business Coach Who Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.