Articles / Tilers

How do tilers stop breakage and tile supply from eating their profit?

Breakage and extra tile supply rarely get tracked as a direct cost against the job that caused them, so the gross profit margin a tiler assumed at quoting time is often lower than what the bank account shows weeks later. The real answer sits in the job's own costing data: what tile supply and breakage actually cost against that bathroom, splashback or wet area job, not the square metre rate used to quote it.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

  • Data first coaching
  • Your nights back
  • Every job priced to make money
  • 9,000+ owners trained
  • Greg is the only coach
  • 20 years in trade, 10 coaching
  • Beat 9pm
  • Places are limited
Greg on videoTwo formulas every tradie must track weekly to stop losing profit

By Greg Allan, tradesman and creator of Data First Coaching

Why does a bathroom job that looked profitable on the quote still feel like it barely paid?

A tiler quotes a bathroom or ensuite at a square metre rate that covers tile, adhesive, membrane, grout and labour, and the job gets booked. Partway through the fix a box of large format tile turns up with hairline cracks, or cuts around a shower recess and tight falls run through more tile than allowed for, so another box of tile supply gets ordered. None of that extra cost gets written against the job itself.

It gets folded into “that's just tiling” and the owner moves on to the next renovation, assuming the numbers still look like the quote did on the day it was sent.

Where does the tile supply and breakage cost actually go once the job is finished?

Most tilers are too flat out on the tools, waterproofing, screeding and chasing falls to stop mid job and log every re-ordered box of tile supply against the job that caused it. A sole trader who says yes to every bathroom and splashback that comes through the phone, without writing down what extra tile supply or breakage each job actually cost, is trusting memory to do a job that belongs to the numbers.

Zoomed in week to week, every job still looks fine. Zoomed out over a quarter, the extra tile supply and breakage across a run of renovation and wet area jobs can quietly cancel out a month of hard graft on the tools, even though nothing felt wrong at the time it was happening.

What number actually tells a tiler the truth about a job's margin?

The number that matters is the gross profit margin on each job once tile supply, breakage, adhesive and membrane are counted as a direct cost, not the square metre rate you quoted at. That margin is the one to check the moment you quote, not something you look at once a month in the books.

When you present a bathroom or wet area job as good, better, best, with standard tile, large format and a feature wall each carrying their own tile supply and breakage allowance built in, you can close on the option that protects your margin and get a booked date there and then, rather than a quote sitting unanswered in someone's inbox.

How can AI agents stop tile supply and breakage slipping through unrecorded?

An AI agent is software that does a job the way you would, using your prices, your wording and your rules. On a tiling job, that means an agent sitting right where tile supply gets ordered or re-ordered, logging the extra cost against that bathroom or splashback job before it gets forgotten, instead of relying on you to remember it weeks later.

Data first, the agent works from your own job costing, not a general wastage guess that treats every trade the same way. AI agents built around how your jobs actually run can also flag when breakage on a run of large format work is creeping above what your square metre rate assumed, so you see it while there is still a job left to fix the pricing on, not after the quarter is already over.

What changes when a tiler sees the real cost of tile supply job by job?

Picture a tiler whose spring and summer renovation season was bringing in more bathroom and wet area jobs than the business could comfortably fit in. The work was flat out, but the margin on it was not reflecting how much was actually being asked of the crew, with breakage running higher on rushed fixes and extra tile supply getting ordered to cover it.

What changed was the pricing. The tiler set a separate rate for renovation and wet area work across the peak months, lifting the square metre rate to reflect the breakage and tile supply risk that peak season genuinely carried, and started explaining that gap to builders and homeowners on the phone as a reason to book outside the rush. Supply-only jobs, where the tiler handed over tile for someone else to fit and carried none of the control over breakage or waterproofing, stopped getting booked. What stayed was work the tiler fixed and could warranty themselves, membrane included.

Should a tiler keep using an off-the-shelf quoting app, or build something around how tile supply actually gets costed?

Some off-the-shelf quoting and invoicing apps work fine for you, and the data from your own jobs shows which ones earn their place. What those general tools rarely know is that large format tile needs different adhesive coverage than standard tile, that breakage runs higher on a feature splashback than a straight floor, or that a shower recess with tight falls eats more tile supply than a flat wet area.

Rather than renting software built for every trade at once, you can have systems built around your own jobs, your own suppliers and your own rates, so the materials cost of a bathroom or renovation job is tracked the way that job actually runs for you, not the way a generic app assumes it does.

How does Data First Coaching approach this?

Data First Coaching starts with the tiler's own job and finance data through the Trade Business Intelligence, not with a guess about what breakage should cost. It looks at gross profit margin job by job, where tile supply and breakage actually land, and whether that matches what the square metre rate assumed. Greg Allan has watched owners feel on top of a busy renovation season while the numbers tell a different story, and as he puts it, “when we don't actually zoom out, look at the financials, that's where you lost all of the profit.” The how, built from that starting point, is worked through inside the Academy, with members who are open minded, innovative and willing to share, because the Trade Business Intelligence is powered by every member.

Looking for a business coach who starts from your numbers? Tiler Business Coach or every answer for tilers.

Also asked

More questions owners ask.

Is breakage just an unavoidable part of tiling, not something worth tracking?

Breakage happens on every tiling job, especially with large format and feature tile, so it is never fully avoidable. What changes the outcome is whether it gets recorded against the job that caused it, so a tiler can see if breakage on wet area or renovation work is running higher than the square metre rate allowed for.

Should supply-only jobs be priced the same as jobs where the tiler also fits the tile?

Supply-only work carries less control over breakage and waterproofing outcomes than jobs where a tiler fixes and warranties their own work, so pricing and margin expectations on each often need to differ. A tiler's own job data shows whether supply-only work is actually paying its way.

Does this only matter on big bathroom renovations, or on smaller jobs like splashbacks too?

Smaller jobs such as a splashback or shower recess repair can lose margin to breakage and extra tile supply just as easily as a full bathroom renovation, because an extra box of tile or a wasted cut is a bigger share of a smaller job's materials cost.

How often should a tiler actually look at this?

Looking at gross profit margin only once a month, after the books are done, means the information arrives too late to change anything on the jobs that caused it. Checking it closer to when each job is quoted and finished gives a tiler a chance to fix pricing before the next run of similar jobs.

Data First Coaching

The Tiler Business Coach Who Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.