By Greg Allan, tradesman and creator of Data First Coaching
Why does an inspection quote so often stop at the leak?
Most roofers climb for one thing and price one thing. The customer rang about a leak, the roofer finds the leak, patches it or quotes it, and comes back down. What gets missed is everything else the climb showed: ridge capping lifting at the ends, flashing pulling away from a valley, sarking gone soft with damp, a gutter run that will not survive the next storm. That is revenue sitting on a roof the roofer has already climbed, and it rarely gets written up because the quote was built around the phone call, not the roof.
This is not a sales problem. It is a scope problem. The inspection shows the whole roof. The quote only ever shows the part that matches the reason for the call-out. Every item left off is a job that either gets missed entirely or goes to whichever roofer notices it next, which is often a competitor doing the re-roof twelve months later.
Why do quotes go quiet during storm season?
Storm season is when a roofer gets the most inspection calls and the least time to follow any of them up. Insurance work floods in alongside the usual leak repairs and restorations, the diary fills, and quoting becomes something squeezed in after hours. The quotes go out, and then nothing happens to them.
The customer is not choosing a cheaper roofer over a dearer one. They are choosing whichever roofer calls them back. A quote sitting unread in an inbox during a busy week is not lost because the price was wrong. It is lost because no one followed it up while the roof was still fresh in the customer's mind and the storm was still fresh in the news.
What should the inspection quote actually include?
The quote should cover everything the roof is likely to need, found on that climb, not just the single item the customer mentioned on the phone. If the flashing is failing, the ridge capping is loose and the valley is rusting through, all three go into the one quote alongside the leak repair.
Gross profit margin gets checked at the point of quoting, line by line, not worked out afterwards from the invoice. A roofer who prices the whole roof but lets margin slip on the extra items has still left money behind, just in a different place.
The close matters as much as the scope. Three options, built from what was actually found on the roof, work better than a single price sitting in an email:
- Good: repair the leak and the failing flashing.
- Better: that, plus the ridge capping and valley work found on the climb.
- Best: a full restoration covering the roof and the guttering, so the customer is not paying for scaffold and edge protection twice within a few years.
Each option ends with a date in the diary, not a quote left waiting to be chased.
What makes a customer say yes to the bigger job?
Asking the customer what prompted the call, and actually listening to the answer, does more for the size of the job than anything written in the quote. A stain on the ceiling, a noise during the last storm, a house about to go on the market: each one tells the roofer what the customer actually cares about, and that shapes which option they choose.
A customer who feels the roofer genuinely looked at their roof, rather than just patched the one thing they asked about, trusts the bigger quote. That trust is built on the roof, during the inspection, before the quote is even written.
How do AI agents keep every quote followed up?
An AI agent is software that does a job the way the roofer would do it, using the roofer's own prices, wording and rules. Used well, it does the following up that a busy roofer stops doing once storm season hits, so quoted value has a chance of becoming booked value instead of going quiet in an inbox.
Picture a roofer whose leads, quotes, job profit and incoming emails were spread across a diary, a few spreadsheets and a phone full of photos. Quoting a re-roof meant working out roof area, sheet counts and ridge capping lengths by hand after every site visit, usually late at night once the storm calls had stopped coming in.
What changes is their own business system built around how that roofer actually works. It tracks every lead through the pipeline so nothing goes quiet. It works out material quantities from photos taken during the inspection. It reports profit on each job automatically instead of at the end of the month. It turns incoming emails into tasks instead of letting them sit unread. This is data first: the follow up and the quoting both start from what the job and the roof actually show, not from memory of a busy week.
How does Data First Coaching approach this?
Data First Coaching starts from the roofer's own numbers, not a general sales process. Through the Trade Business Intelligence, it looks at how many inspections turn into quotes, how many quotes turn into booked jobs, and where in that line the drop happens, whether that is scope left off the quote, margin slipping on the extras, or follow up that simply stops in a busy week. Greg Allan has said that “showing interest and inquiring about them is such a powerful tool for you guys”, and that habit shows up in the numbers as much as the roof. The how, built around that roofer's own pricing and wording, is worked through inside the Academy, with members, because the Trade Business Intelligence is powered by every member who is open minded, innovative and willing to share what they learn.
Looking for a business coach who starts from your numbers? Roofer Business Coach or every answer for roofers.

