By Greg Allan, tradesman and creator of Data First Coaching
What work health and safety duties does the owner of a stonemasonry business have in Australia?
A stonemason business owner carries the legal duties of a PCBU under work health and safety law, which means managing silica dust, engineered stone, machinery and manual handling risks so far as is reasonably practicable, consulting with workers, training the crew, arranging health monitoring where there is significant risk, and reporting serious incidents to the WHS regulator. Safe Work Australia and state regulators publish what that looks like, and the duty sits with the owner whether the business is a sole trader or a company.
Under the model WHS laws that most of Australia's states and territories use, a stonemason business is treated as a person conducting a business or undertaking, a PCBU. According to Safe Work Australia's guidance for PCBUs, a PCBU must ensure, so far as is reasonably practicable, the health and safety of workers at the bench, on the CNC line and out on site, and must make sure customers, builders and the public are not put at risk by the cutting, polishing or install work carried out. Where the business is a company, Safe Work Australia's crystalline silica guide says the officer, usually the director, must also exercise due diligence to make sure those systems are actually followed, not just written down.
What duties apply specifically to silica dust and engineered stone in a stonemason's workshop?
A stonemason's workshop carries specific duties around silica dust because cutting and polishing natural stone and sandstone releases fine dust, and the rules for engineered stone go further again, including a ban on most new work with engineered stone benchtops, panels and slabs. Health and air monitoring, training and record keeping duties apply on top of the general WHS duty, and they are enforced a little differently state by state.
SafeWork NSW names stonemasonry directly as a high exposure trade for respirable crystalline silica, alongside quarrying and construction, in its code of practice on managing silica risk. The duty covers controlling dust from cutting and polishing natural stone and sandstone, and it goes further for engineered stone: Safe Work Australia's engineered stone prohibition guidance says a PCBU must not carry out, or let a worker carry out, work that manufactures, supplies, processes or installs engineered stone benchtops, panels or slabs, with narrow exemptions. Work on legacy engineered stone already installed still carries duties, and WorkSafe Queensland says a business doing permitted work on that legacy stone must notify the regulator, with no transitional period in that state, so the rule is not identical everywhere. Where air or health monitoring is needed, SafeWork NSW's specific duties page says reports must be kept as a confidential record for decades, not filed in a drawer and forgotten.
Where does the real safety risk actually show up in a stonemasonry business?
The real safety risk in a stonemasonry business often shows up nowhere near the silica management plan or the PPE register. It shows up on the Thursday afternoon when a template has come back tight, a builder wants the install finished before the weekend, and the workshop pushes a cut or a lift through without the usual checks.
Fatigue narrows attention on a wet saw, a CNC line or a sling moving a slab, and that is where a stonemason gets hurt, not in the paperwork sitting in a folder. The duty to manage risk, so far as reasonably practicable, covers more than dust extraction and masks. It covers the pace a workshop runs at and whether the crew doing the cutting, polishing and install is working inside hours where attention stays sharp, because a tired hand near a blade or a sling does not announce itself before it slips.
How do you protect your crew when the workshop is under pressure to turn around a job?
You protect your crew by treating your own run sheet as a safety document, not only a scheduling one, and by using your actual job data, not memory, to see when a crew is being stacked past the point where attention on a saw or a sling stays sharp. Picture a stonemason with three kitchen benchtops to template, cut and install before Friday for a builder who keeps moving the handover date: the risk is not the saw, it is the week already stacked behind it.
An AI agent, which is software that does a job the way you would, following your own prices, your own wording and your own rules, can watch your job and quoting data and flag when a scheduled template, cut or install is stacking up against hours your crew has already worked that week, before you book the next job on top of it. That is a data first way to run the workshop: the number that tells the truth is not what the plan says on paper, it is what your own job data shows about hours worked, jobs booked and crew left to do them, updated as the week runs rather than remembered after someone gets hurt.
What should you track to prove you are meeting your WHS duties, not just have a plan on the shelf?
You prove the duty is being met by keeping the records current against your own crew and job data, not by having a folder somewhere that nobody has opened since it was written. Training dates, PPE checks and health monitoring for the crew cutting, polishing and installing stone need to stay current, because that is what an inspector asks for first.
Safe Work Australia's guidance on notifiable incidents says a PCBU must report serious injuries, illnesses and dangerous incidents to the WHS regulator immediately and preserve the site until an inspector says otherwise. An AI agent can keep training dates, PPE checks and health monitoring reminders current against your own crew and job data, in your own wording, so the record exists before an inspector or a regulator ever asks for it, instead of being pieced together under pressure after an incident. This is general information, not legal, tax or employment advice. Check your own situation with the body named here or a qualified adviser.
Where can you check the current rules?
- Safe Work Australia's PCBU guidance: what a PCBU is and the general duty to manage health and safety risks.
- Safe Work Australia's crystalline silica guide: officer due diligence duties and worker duties around silica.
- SafeWork NSW's silica code of practice: naming stonemasonry as a high exposure trade and the silica risk control plan.
- SafeWork NSW's specific duties for engineered stone: air monitoring and health monitoring record keeping.
- Safe Work Australia's engineered stone prohibition guidance: what work with engineered stone is now prohibited.
- WorkSafe Queensland's engineered stone ban page: how Queensland treats legacy engineered stone already installed.
- Safe Work Australia's incident reporting guidance: when and how to notify the regulator of a serious incident.
How does Data First Coaching approach this?
Data First Coaching starts by looking at your own job, crew and quoting data through the Trade Business Intelligence, not at a generic WHS checklist, because for a stonemason business the real risk usually sits in how work gets scheduled under pressure, not in whether a plan exists on paper. Greg Allan built this after running his own trade business, and he teaches that an owner's own health, and their crew's, is a glass ball: “if you drop the glass ball, it scratches it and that scratch will never come out”, so fatigue and overload get tracked as a safety number, not treated as a mood. The how, including where to build that tracking into your own systems, is worked through inside the Academy, with members, because the Trade Business Intelligence is powered by every member who joins open minded, innovative and willing to share.

