Articles

What work health and safety duties does the owner of a mechanical repair workshop have in Australia?

A mechanical workshop owner in Australia carries a primary duty of care under work health and safety law, covering technicians, apprentices and anyone in the workshop, including safe hoists, safe systems of work on the floor, consultation with the crew, and training that matches the actual risk. Company directors carry a personal duty of due diligence too. The detail differs by state and territory, and in New Zealand under separate legislation, so check the current rules for your workshop.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

  • Data first coaching
  • Your nights back
  • Every job priced to make money
  • 9,000+ owners trained
  • Greg is the only coach
  • 20 years in trade, 10 coaching
  • Beat 9pm
  • Places are limited
Greg on videoDecember work rush destroys quality and burns out your team

By Greg Allan, tradesman and creator of Data First Coaching

Why does safety pressure hit hardest when the hoist bay is full?

The pressure on safety in a mechanical workshop rarely shows up at an audit. It shows up when a booking overruns, the next car is already in the yard, and the fastest way through looks like skipping the hoist check or leaving an apprentice to finish a job alone. That is the moment a workshop's legal duty to its technicians and apprentices is actually tested.

Most workshop owners know the rules exist somewhere in a folder near the till. The harder question is whether the system holds on a Friday afternoon when three bays are full, the scan tool is tied up chasing a comeback from the week before, and the technician on the fourth car is an apprentice working largely on his own. Mechanics running a workshop this way often find safety becomes the first thing quietly dropped, not because anyone decided to drop it, but because nothing in the day was built to protect it, and a rushed job is also the quickest way to end up eating the labour rate the job was quoted at.

What is your primary duty under WHS law, and does your crew have a say?

As the person running a mechanical workshop, you are what work health and safety law calls a person conducting a business or undertaking, or PCBU, and you carry a primary duty of care for every technician, apprentice and visitor in the workshop. That duty also requires you to consult your crew, so far as reasonably practicable, on anything that affects their safety, rather than deciding it alone in the office.

According to Safe Work Australia, the primary duty covers the provision and maintenance of a safe work environment, safe plant and structures, safe systems of work, and the safe use, handling and storage of plant and substances such as brake cleaner or degreaser kept on the bench. It also covers training, information and supervision, and the ongoing monitoring of workers' health, including psychological health, not just physical injury on the hoist. Separately, Safe Work Australia's plant code of practice says you must consult the technicians and apprentices a decision affects, and coordinate with other duty holders, such as a landlord or a hoist supplier, where responsibility for the same risk overlaps. For a mechanic used to making the call on every job alone, that is a shift: safety is not just something you provide, it is something you talk through with the people doing the work.

What do the rules say about hoists and other plant in your workshop?

Because a car sitting above a technician's head is one of the highest-risk items of plant in any workshop, several regulators have published rules specific to hoists. They cover daily checks, maintenance records, training, and in some states, registration of the hoist's design.

According to WorkSafe WA, a hoist must be inspected by the operator before use each day, maintained by a competent person in line with the relevant Australian Standard and the manufacturer's instructions, and the inspection and maintenance history kept as a logbook. WorkSafe NT adds that a hoist must be installed and commissioned by a competent person, that repairs and modifications must only be done by someone competent and authorised, and that operators need a functional test of the safety components before working under a car on the hoist. In Queensland, WorkSafe Queensland notes vehicle hoists are among the plant types that require design registration. If you buy a second-hand hoist for the workshop, SafeWork NSW's plant code of practice says the supplier carries duties too, including checking it for faults before it goes into your bay. None of this replaces the roadworthy or safety inspection work mechanics already do on customers' cars and utes; it is the separate question of whether the plant your own crew works under is safe, whatever is parked on the hoist for a service, diagnostics, brakes or tyres.

Does this duty fall on you personally, not just the business?

If you are a director of the company that runs the workshop, yes: WHS law gives officers a personal duty separate from the business's duty. You have to exercise due diligence, meaning you take reasonable steps to see the workshop has the resources and processes to manage risk, rather than signing off a policy once a year and hoping the floor follows it.

Safe Work Australia's hazardous manual tasks code of practice also sets out the duty to eliminate or minimise the risk of manual handling injuries, common on a workshop floor shifting tyres, batteries, gearboxes and exhausts, and says any training you give a technician or apprentice has to be suitable for the actual work and the actual risk at the time, not a generic induction done once on day one. This is general information, not legal, tax or employment advice. Check your own situation with the body named here or a qualified adviser.

What changes when safety records come from your own data instead of memory?

Keeping track of who checked the hoist, who signed off an apprentice's training, and where a booking is close to overrunning is easier to see in your own job and safety data than to recall at the end of the month. A data first view of the workshop shows where pressure is actually landing on the floor, not just what the booking sheet says should be happening.

Picture a workshop owner who was spending around twenty hours a week doing roadworthy inspections himself, which tied up a big chunk of his week that could have gone into running the floor and keeping an eye on the hoists. He handed the inspection work to a team member who was keen to move off the tools, while the rest of the crew stayed on repairs and warranty work. The daily hoist check, the logbook entry and the apprentice's training record are exactly the kind of paperwork that gets skipped first when the booking sheet is full, and exactly the record a regulator will ask for if something goes wrong.

An AI agent, software that does a job the way you would, with your prices, wording and rules, can hold that hoist checklist, logbook entry and training record in the background, chasing the gap before the next car goes up rather than after an audit finds it missing. A second AI agent can watch where a technician's week is stacking up against the booking sheet, so the moment that leads to a rushed job, a comeback or a corner cut on the hoist gets seen before it costs the business the booking, the car, or the person.

Where can you check the current rules?

WHS laws are model laws each Australian state and territory regulator adopts its own version of, so the regulator for your state is the one to check. New Zealand runs separate health and safety legislation administered by WorkSafe New Zealand, so a workshop there should check directly with WorkSafe New Zealand rather than assume the Australian rules apply.

How does Data First Coaching approach this?

Data First Coaching starts with the owner's own job and safety data on the workshop floor, not a generic policy. Through the Trade Business Intelligence, Greg Allan looks at where a mechanic's bookings overrun, where hoists run back to back, and where training records are thin, because that is where the real risk sits, not just at the point of an audit. Greg's view is that “you follow safety procedures, you do all the right things”, and a workshop run that way also tends to carry fewer comebacks and steadier margins. The how of building that system is worked through inside the Academy, with members who are open minded, innovative and willing to share, because the Trade Business Intelligence is powered by every member.

Also asked

More questions owners ask.

Does a one-person workshop still have these duties if there's no other staff?

Yes. A sole trader mechanic still owes a duty to anyone affected by the work, such as a customer waiting on a quote at the counter or a subbie called in for a diagnostic job, even without technicians or apprentices on the books. The duty does not disappear because the crew is only you.

Do these WHS duties apply the same way in New Zealand?

No. Australia's WHS laws are model laws each state and territory adopts its own version of, while New Zealand runs separate health and safety legislation administered by WorkSafe New Zealand. A workshop in New Zealand should check directly with WorkSafe New Zealand rather than assume the Australian rules apply.

What happens if a hoist hasn't been checked and something goes wrong?

That depends on the circumstances and is a matter for the WHS regulator in your state or territory to assess. The sources above set out the daily check, maintenance and training obligations, but whether a specific incident breaches them is not something a general article can answer, so check with the regulator or a qualified adviser.

Do apprentices need different safety treatment to qualified technicians?

The primary duty of care covers everyone in the workshop, but training obligations are explicit that instruction must suit the work and the risk a worker faces at the time. In practice this usually means an apprentice needs closer supervision and more specific training than a qualified technician doing the same job.

Data First Coaching

Coaching That Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.