By Greg Allan, tradesman and creator of Data First Coaching
What work health and safety duties does the owner of a gasfitting business have in Australia?
As the owner of a gasfitting business, you carry the primary work health and safety duty as a person conducting a business or undertaking, a PCBU. According to Safe Work Australia, a PCBU must ensure, so far as reasonably practicable, the health and safety of workers while they are at work in the business, and of others who may be affected by the work, such as the homeowner standing nearby while you test a gas line or service a heater.
That primary duty covers more ground than most owners first picture. It means providing and maintaining a safe work environment, safe plant and structures, and safe systems of work. It means the safe handling and storage of substances such as LPG, access to adequate facilities on site, and giving your crew the instruction, training, information and supervision the job actually needs. It also means monitoring the health of the people doing the work, not only the gas appliance they are working on.
Why does this duty reach further than the compliance certificate you already sign?
Most gasfitters already run the real safety check without being told to. On an ordinary callout, a gasfitter is reading for carbon monoxide risk, a cracked flue, a leak the customer walked straight past without noticing, because the job demands that judgement. WHS law does not invent a new instinct. It takes the one gasfitters already use on the gas line and the appliance and turns it into a formal duty across the whole business, not just the job in front of them.
The test most duties are measured against is what the law calls reasonably practicable, and Safe Work Australia's guide to the standard notes that a risk assessment is mandatory under the WHS Regulations for certain high risk activities, including entry into a confined space, which a gasfitting business can run into on an install under a house or in a plant room. Energy Safe Victoria's safety checklist sets out the same reflex in gas law itself: a gasfitter who becomes aware of a danger from a defect must act without delay to make the installation safe, and notify the owner and occupier, extending to notifying the regulator and the gas distributor if the installation cannot be made safe. The judgement that tells a gasfitter whether an install is safe to leave live is the same judgement WHS law expects applied, formally, to the people doing the work.
What does this mean for who you employ and send out on a callout?
Your WHS duty does not stop at your own safety. It covers every apprentice, labour hire worker and subbie gasfitter you send out on an install, a pressure test or a leak detection job. WorkSafe Victoria's summary of employer duties states that an employer owes the same duty to independent contractors and their employees working at the workplace, for matters the business has or should have control over.
This matters because a gasfitting business rarely sends one person to every job. An apprentice learning to work a meter and a bayonet fitting does not read risk the way a licensed gasfitter does, and a subbie brought in for a busy stretch of hot water and heater servicing is still someone whose safety sits inside your duty while they are on your job. The duty follows the work, not the contract type.
Is your gasfitting licence and compliance certificate the same thing as your WHS duty?
No. A gasfitting licence and a certificate of compliance are separate from the WHS duty, and licensing is regulated differently depending on where the business operates. Licensing tells a regulator the work was carried out by someone qualified to do it. WHS duty covers how safely the whole business operates while that work gets done.
In New South Wales, the Gasfitter compliance and regulatory obligations page states a licence is required to complete any gasfitting work, and that a gasfitter must test an installation connected to a gas network and submit a certificate of compliance within a short window after finishing the job. In the Northern Territory, NT WorkSafe requires a licence to undertake gasfitting work and a certificate of compliance plate fixed near the control valve once an install or repair is complete. Energy Safe Victoria's FAQ confirms that the owner of a gasfitting business does not need to hold a gasfitter's licence personally, but the business must ensure every staff member or contractor carrying out gasfitting or gas appliance servicing is suitably qualified. Rules differ by state and territory, and Safe Work Australia's own guide to PCBUs notes it is a national policy body, not a regulator, so check the body for the state or territory the business operates in rather than assume one state's rule covers another.
How does fatigue and workload fit into your WHS duty?
Your WHS duty includes psychological health, not only cuts, burns and gas exposure. Safe Work Australia confirms that health under WHS law is defined as both physical and psychological health, and that managing the risk to a worker's psychological health is part of the primary duty, so far as reasonably practicable.
A gasfitter running back to back callouts through a cold snap, with heater breakdowns stacking up and hot water emergencies on top, is still a worker whose fatigue sits inside that duty. A roster that quietly works your crew into exhaustion is not fixed by handing out more PPE or putting up another sign. This is where keeping the right records straight from the job, data first, tells you more than memory does at the end of a busy week: hours on the tools, callouts per person, overtime creeping up as summer servicing turns into winter heater demand. An AI agent, which is software that does a job the way you would, using your prices, wording and rules, can keep that roster and fatigue picture current without it becoming another form nobody fills in. A second AI agent can hold the induction records, safety data sheets and training history for every gasfitter and apprentice on the books, so the paperwork side of the WHS duty is carried the same way every week instead of being remembered only when someone asks for it.
This is general information, not legal, tax or employment advice. Check your own situation with the body named here or a qualified adviser.
Where can you check the current rules?
- Duties of a PCBU: Safe Work Australia's outline of the primary duty of care, including psychological health.
- How to determine what is reasonably practicable: the standard duties are measured against, and when a risk assessment is mandatory.
- Summary of the OHS Act 2004: General OHS Duties: WorkSafe Victoria on duties to employees, contractors and labour hire workers.
- Gasfitter compliance and regulatory obligations: New South Wales licensing and certificate of compliance requirements.
- Gasfitters, NT WorkSafe: Northern Territory licensing and certificate of compliance plate requirements.
- Gas Safety Checklist: the duty to act and notify when a gasfitter finds a dangerous defect.
- Frequently Asked Questions, Energy Safe Victoria: whether a gasfitting business owner must personally hold a licence.
- Persons Conducting a Business or Undertaking: why Safe Work Australia is a policy body, not the regulator, in any state or territory.
How does Data First Coaching approach this?
Data First Coaching starts by looking at what the gasfitting business's own records actually show, not what the owner remembers: who is on the roster, how many callouts they are running, how overtime and fatigue build before a cold snap, and whether training and licence records are current rather than assumed. Greg Allan built his own trade business before coaching others, and he teaches that “you know what you're looking at and the customer doesn't”, which is exactly the judgement WHS law asks a gasfitter to apply to their own business, not only the job. The how, the systems that carry that record keeping, is worked through inside the Academy, with members who are open minded, innovative and willing to share, because the Trade Business Intelligence is powered by every member.

