Articles

What numbers should an earthmoving business check every week?

The two numbers that actually show whether an earthmoving contractor's week made money are job efficiency and operational efficiency, tracked separately for every excavator, bobcat and tipper rather than blended into one total. Job efficiency checks billed hours against time actually cutting or trenching. Operational efficiency checks billed hours against every hour paid, including float, servicing and wet days. Together they expose the margin loss a bank balance or turnover figure hides.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

Greg on videoTwo formulas every tradie must track weekly to stop losing profit

By Greg Allan, tradesman and creator of Data First Coaching

What numbers actually tell you if the week made money?

Most earthmoving contractors check the bank balance or the week's invoices and call it a good week if the float went out, the excavator and bobcat were busy, and the tipper kept running to the tip. That picture can be completely wrong. Turnover and a healthy bank balance only show cash moving, not whether each machine actually made money on the hours it was paid for.

The number that tells the truth is machine hours, split into job efficiency and operational efficiency, checked for every excavator, bobcat and tipper separately rather than rolled into one happy-looking total for the whole earthmoving business. A trade business that blends a strong dry hire job with a slow wet hire day, or hides a day of floating plant between sites inside the worked column, can look flat out and still have quietly lost money on the days that mattered. The gap does not show up until the accountant produces the year's figures, and by then there is nothing left to fix for that week.

Why can a busy week on site still lose money for an earthmoving contractor?

A week can look full, machines running, tipping fees paid, operators on site from early, and still lose money, because the cost of running a machine gets counted for the whole day whether the hours were billable or not. Float time between sites, a breakdown that leaves an excavator idle, a wet day that stops trenching but still pays the operator, and routine servicing all cost the same in fuel and wages as a billable hour on a site cut.

A handful of strong dry hire jobs can carry the week on paper while those costs quietly eat the margin underneath. This is close to the mistake that caught out even the person who built the method behind this kind of weekly check: a year that looked like solid, steady work on the tools netted almost nothing once the figures were actually checked properly, because the losing days were hidden inside the busy-looking ones. That is why checking these numbers weekly, rather than waiting for one annual figure, matters so much to an earthmoving contractor.

What is job efficiency and why track it machine by machine?

Job efficiency is the hours a machine actually billed against the hours it was on the job, and you need to see it separately for the excavator, the bobcat, the tipper and anything else you run, not combined into one average. If your excavator was booked for a site cut all day but spent part of that time stuck behind a slow tipper or waiting on an attachment change, the billed hours and the actual hours on the job are not the same, and the gap is where the margin disappears.

Checked machine by machine, job efficiency tells you which plant earns its keep on which jobs, and which jobs are quietly running your best excavator at a loss while the invoice still says it was a good day.

What is operational efficiency and why does it expose float time?

Operational efficiency is the hours a machine billed against every hour it was paid for, including time spent floating between sites, waiting at the tip, in for servicing, or sitting through a wet day with the operator still on the clock. This is the number that catches what job efficiency alone cannot see.

An excavator can look perfectly efficient on the jobs it actually worked and still be losing money across the week once float time, fuel between sites and an operator paid through a wet day are counted in. Checking this number weekly, for every machine, shows you where the real cost of running your plant is being carried, and whether your dry hire and wet hire rates still cover it.

How do AI agents help an earthmoving contractor keep these numbers current?

An AI agent is software that does a job the way you would do it yourself, using your prices, your wording and your rules, so it can pull together each machine's billed hours against its actual and paid hours without you doing it by hand at the end of a long week. Instead of waiting for the bookkeeper to reconcile fuel, servicing and operator hours later, AI agents can keep job efficiency and operational efficiency current for every excavator, bobcat and tipper as the week runs.

This matters because a data first view of your own numbers, checked against your own jobs rather than guessed from memory or a feeling about how busy the week looked, is the only way to catch a losing machine before it runs another losing week. AI agents doing that non-billable tracking also means more of your time, and your office time, goes on quoting and running sites rather than chasing numbers after the fact.

What changes when an earthmoving contractor fixes pricing instead of chasing more jobs?

Picture an earthmoving contractor whose pricing had been set job by job, a different rate for a builder than for a civil client doing bulk earthworks, with no real link back to what the machine actually cost to run that day. The rates had drifted a long way from where they needed to be, and nobody had checked, because the invoices still went out and the bank balance still looked fine.

Moving to one fixed rate across every type of customer, including builders, with a meaningful increase built in from what the machine hours actually showed, changes the picture completely. From there, reviewing the cost of running the business every quarter, rather than once a year with the accountant, keeps the rate honest as fuel, servicing and tipping fees shift. The fix was never take on more work. It was the price per hour, checked against the real numbers, all along.

How does Data First Coaching approach this?

Data First Coaching starts from the earthmoving contractor's own job and machine data through the Trade Business Intelligence, not from a conversation about how busy the week felt. It looks at job efficiency and operational efficiency for every excavator, bobcat and tipper first, because that is usually where a margin problem actually starts, long before it shows up in a bank balance or an annual figure. Greg built this from running his own trade business, which is why he tells owners, “don't just rely on your accountant to tell you if you've done well every year.” The how, the systems and the build, is worked through inside the Academy, with members, because the Trade Business Intelligence is powered by every member, and the Academy is for owners who are open minded, innovative and willing to share.

Also asked

More questions owners ask.

How often should an earthmoving contractor actually check machine hours?

Weekly, not just when the accountant produces the year's figures. Checking job efficiency and operational efficiency for each excavator, bobcat and tipper every week catches a losing day, a wet day or a float problem while there is still time to fix the next week's numbers.

Does checking these numbers replace the accountant?

No. The accountant still handles compliance and the year's figures. Weekly job and operational efficiency numbers sit alongside that, and catch a margin problem on site long before it shows up in an annual figure that arrives too late to act on.

Do these numbers apply to hired-in plant as well as owned machines?

Yes. Any excavator, bobcat or tipper on dry hire or wet hire, owned or hired in for a job, can be tracked the same way, because the question is always how many of the paid hours were actually billable on that machine.

Can a quiet-looking week actually be more profitable than a busy one?

Often, yes. A week with less float time, fewer breakdowns and tighter servicing can show stronger operational efficiency than a week that looked flat out but had machines paid for hours they were not billing on site.

Data First Coaching

Coaching That Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.