Articles

What numbers should a stonemason check every week?

A stonemason's real weekly numbers are job efficiency, billable hours measured against the time actually spent on a job, and operational efficiency, billable hours measured against every hour paid, including travel between the workshop and site. These two numbers catch what a bank balance or a year-end profit and loss never will: the templating visits, CNC setup time and install trips that quietly eat the margin on a benchtop or cladding job that looked fine on the invoice.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

Greg on videoTwo formulas every tradie must track weekly to stop losing profit

By Greg Allan, tradesman and creator of Data First Coaching

Why can a benchtop job look profitable and still lose money?

A benchtop job can sit on the invoice looking exactly as healthy as it was quoted, and still lose money once every hour is counted. The templating visit that ran long because the kitchen wasn't ready, the CNC cutting time that overran on a tricky natural stone slab, a polishing rework on an engineered stone edge, and an install trip that turned into two because access wasn't confirmed: none of that shows up on the invoice.

It shows up in the hours actually paid for that week. Most stonemasons never check that number. They look at the bank balance, see money sitting there from a run of good jobs, and assume the business is doing fine. The slow leak from unbilled templating time and underpriced variations only shows up later, once cash is tight and nobody can say exactly where it went.

Why does waiting for the accountant hide the real problem?

A stonemasonry workshop can run flat out all year, slabs moving through cutting and polishing every week, install crews out most days, and still produce almost no net profit once the profit and loss finally gets checked. That happens because the owner never looked at the numbers week to week and relied on the year-end summary to tell the story instead.

By the time that report lands, the quarter of slab jobs that quietly ate the margin has already happened. Fixing it after the fact means looking back at jobs already invoiced and paid, where nothing can be changed. The information that would have caught it was sitting in the workshop all along, in the gap between the hours quoted and the hours actually worked.

What are the two numbers every stonemason should check every week?

You want two separate efficiency numbers in front of you every week, not one blended figure. Job efficiency is billable hours against the time your crew actually spent on the job itself, workshop cutting, templating, polishing, install. Operational efficiency is billable hours against every hour you paid for, including the drive from the workshop to site and back.

For a stonemason running templating runs and install trips across a spread-out patch, the gap between those two numbers is exactly where profit disappears. A job can look efficient on the tools and still be bleeding margin once travel, loading the slab, and waiting on site are counted in. Checking both, every week, shows you which one is slipping and why, instead of a single number that hides the cause.

How does a single markup number hide the real margin?

A quote built on one markup figure across labour, materials and subcontracted CNC cutting can look healthy line by line and still fail once it's blended together, because markup always overstates real margin. A stonemason quoting a kitchen job with engineered stone supply, in-house fabrication and an outsourced CNC run for a complex template can apply the same markup to all three and still end up with a thinner margin than the quote suggested.

Picture a stonemason whose pricing had been set job by job, varying between a homeowner, a kitchen company and a builder, with the rates never quite where they needed to be. Moving to one fixed price structure across every type of customer, builders included, with a proper rate increase, and reviewing the cost of running the business every quarter rather than once a year, changes what the owner can see and when they see it.

Checking the actual margin at the moment of quoting, not just the markup applied, and closing with a good, better, best set of options that ends in a booked date rather than a quote sitting in someone's inbox, protects that margin before the job ever starts.

What changes when AI agents take on this tracking?

An AI agent is software that does a job the way you'd do it yourself, using your prices, your wording and your rules. For a stonemason, that can mean an agent that watches job efficiency and operational efficiency every week without someone in the workshop stopping fabrication to build a spreadsheet.

AI agents can also sit inside the quoting process itself, checking the real margin on a benchtop or cladding job against your own historic data before the quote goes out, rather than after the slab is cut and the install crew has already been to site. That's data first: the decision comes from this week's numbers, not last year's memory of what a similar job used to cost.

How does Data First Coaching approach this?

Data First Coaching starts from the stonemason's own job and finance data through the Trade Business Intelligence, not from a conversation about how the business feels it's going. Greg Allan looks first at where job efficiency and operational efficiency actually sit, week by week, because that's where templating overruns, CNC time and install travel show up long before a profit and loss report would catch them.

From there the work is finding where the gap really starts, a quoting habit, a markup assumption, an underpriced variation, rather than treating the symptom again next quarter. The how of building that into the business is worked through inside the Academy, with other members, because the Trade Business Intelligence is powered by every member who joins open minded and willing to share.

Also asked

More questions owners ask.

Should a stonemason track these numbers differently for memorials and restoration work than for benchtops?

The same two numbers apply, but the mix changes. Memorial and restoration jobs often carry more site time, access issues and sandstone or heritage conditions that extend hours without extending the quote, so operational efficiency on those jobs deserves its own look rather than being averaged in with benchtop work.

Does checking these numbers weekly mean doing a full profit and loss every week?

No. Job efficiency and operational efficiency are narrower numbers, focused on hours against hours, not a full set of accounts. The point is catching a slipping week early, not replacing the accountant's reporting, which still matters for tax and compliance.

What about dust and silica compliance time in the workshop, does that count as billable?

Time spent on dust extraction, silica controls and workshop safety is real paid time but it is rarely billable to a job directly. It belongs in operational efficiency, as part of every hour paid for, which is exactly why that number matters alongside job efficiency rather than instead of it.

Can these two numbers help with pricing CNC work done by a subcontractor?

Yes. A blended markup on outsourced CNC cutting can hide a thinner margin than labour and materials carry alone. Watching job efficiency against actual hours, including the wait on a subcontracted cut, shows whether that line is pulling the whole quote's margin down.

Data First Coaching

Coaching That Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.