Articles

What numbers should a shopfitting business check every week?

The three weekly numbers a shopfitting business should check are the blended margin across the week's multi-line quotes (joinery, install and subcontractors together, not line by line), the gap between quoted and actual hours on jobs just handed over, and what is still sitting unclaimed in progress claims and retentions. Checked weekly, these catch the gap between a job that looked profitable and one that actually was, while a fix is still possible.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

Greg on videoTwo formulas every tradie must track weekly to stop losing profit

By Greg Allan, tradesman and creator of Data First Coaching

Why can a fit-out look profitable on the quote and still lose money on site?

A retail or hospitality fit-out quote can look healthy line by line, joinery priced well, install labour priced well, subcontractors priced well, and still blend down to a thin margin once it is all added together. Landlord-driven delays, a late set of shop drawings, an after hours push to hit a tenancy deadline and a variation or two can quietly eat the gap between what the quote promised and what the job actually returned.

Most shopfitters only see this once the job is closed, the crew is on the next site and the defects list from handover is ticked off. By then there is nothing left on that job to fix it on. The margin that leaked out during the fit-out is gone, and the only record of it sits buried across invoices, supplier bills and timesheets nobody has pulled together.

Why do shopfitters only find out the real margin when the accountant finishes the year?

A shopfitter can run flat out across a full year of commercial fit-outs, hit every programme, keep every project manager happy, and still find the year's real margin was far thinner than it felt on site. The annual profit and loss figure from the accountant arrives long after the jobs that thinned it are finished and invoiced.

By the time that figure lands, the same pattern has often repeated across several fit-outs without anyone noticing, because nobody was watching it job by job while there was still time to act. Relying on one number, once a year, after the jobs are closed, is a backward looking view of a business that moves fit-out to fit-out.

What numbers should a shopfitting business check every week?

Three numbers tell a shopfitter the truth that the programme alone cannot. The blended margin across the week's quotes, not the margin on joinery or install or subcontractors looked at separately. The gap between the hours quoted and the hours actually paid on any job that has just been handed over. And what is still sitting unclaimed in progress claims and retentions, which is gross profit a shopfitter has earned but not yet turned into cash.

This same blended margin number also belongs at the point of quoting, not only in the weekly review. When a shopfitter is pricing a fit-out, showing the client a good, better and best version of the scope, built from what was actually discussed on site, and locking in a start date there and then, keeps that margin visible from the first conversation rather than discovering it was thin once the job is already running.

How does checking the blended margin on a multi-line quote catch the gap early?

A multi-line quote hides its real margin inside the mix. Joinery built in the workshop might run close to plan. Install on site might run long because access through the landlord's tenancy rules was tighter than expected. A subcontractor might come in over the number used to price the job. None of these on their own looks alarming, but added together across the week's quotes, the blended figure can be well below what the business needs to carry its overheads.

Checking that blended number every week, while quotes are still being priced and jobs are still open, means a shopfitter can adjust the next quote, have a harder conversation with a supplier, or reprice a variation before it is locked in, rather than finding out once the fit-out is finished and invoiced.

What happens when progress claims and retentions sit unclaimed after handover?

A progress claim that has not been submitted, or a retention still held by the builder or landlord after a defect period has closed, is profit a shopfitter has already earned but cannot spend. It does not show up as a loss. It just quietly sits there, making the business feel tighter on cash than the completed jobs say it should be.

Across a run of commercial fit-outs, unclaimed progress claims and uncollected retentions can add up to a meaningful amount of gross profit that exists only on paper. Checking what is outstanding every week, rather than at the end of a project or the end of a year, keeps that money moving instead of becoming something the business has to chase months after the crew has forgotten the job.

Where do AI agents fit into keeping these numbers checked every week?

An AI agent is software that does a piece of office work the way a shopfitter would do it themselves, using their own prices, their own wording and their own rules. Instead of a shopfitter manually pulling hours, quotes and claims together each week, an agent can do that gathering so the owner sees the numbers without spending non-billable hours building the picture.

Picture a shopfitter whose week used to disappear into site visits for enquiries that were never going anywhere, and into writing replies to clients who pushed back on price. An AI agent reading those enquiry emails, asking for photos and giving a rough price range before any site visit is booked, frees that time. Another agent drafting replies to written price objections, built from what the shopfitter has learned about presenting good, better and best options, keeps the tone consistent without the owner typing it out each time. A third checks every finished job for hours worked, photos and site notes, so the gap between quoted and actual shows up while the job is still fresh.

This is data first thinking: the numbers come from the shopfitter's own jobs and quotes, not a generic template, and the agents sit exactly where the office work used to pile up.

How does Data First Coaching approach this?

Data First Coaching, built by Greg Allan from running his own trade business, starts from a shopfitter's own numbers rather than a conversation about how the year felt. It looks first at the blended margin across live quotes, the gap between quoted and actual hours on recently handed over jobs, and what is sitting unclaimed in progress claims and retentions, because that is usually where a thin year actually begins. Greg's own line on this is “don’t just rely on your accountant to tell you if you've done well every year”. The how, the systems and the agents that do this weekly work are built inside the Academy, with members, because the Trade Business Intelligence is powered by every member who is open, sharp and willing to share what they learn.

Also asked

More questions owners ask.

Does checking these numbers every week take time away from running jobs?

It can, if a shopfitter pulls the figures together by hand. Much of that gathering, hours against quotes, claims against invoices, can sit with an AI agent instead, so the owner reviews a clear picture rather than building one from scratch each week.

Does this still matter for a small shopfitting business with just the owner and a couple of installers?

Yes. A small shopfitter often has less room to absorb a thin job, because there is no larger run of work to even it out. Catching a weak blended margin early matters more, not less, when the business is small.

Should unclaimed retentions be chased the same way as an overdue invoice?

Retentions usually sit under different terms tied to a defect period, so they need their own tracking rather than being lumped in with overdue invoices. Either way, if nobody is watching what is outstanding, it tends to sit longer than it should.

How is checking margin weekly different from what the accountant already does?

An accountant usually reports on the year once it is finished, after every fit-out in it is closed. Checking weekly looks at jobs still on the books, while there is still a chance to adjust the next quote or chase a claim.

Data First Coaching

Coaching That Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.