Articles

What numbers should a mechanic workshop owner check every week?

A mechanic workshop owner needs to check job efficiency (billable hours charged against the hours a job actually took on the hoist) and operational efficiency (billable hours against total hours paid, including parts runs, warranty paperwork and apprentice supervision), every week. Those two numbers, checked weekly alongside how labour rate and parts margin are booked, show the gap between a busy workshop and a profitable one before the bank balance does.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

Greg on videoTwo formulas every tradie must track weekly to stop losing profit

By Greg Allan, tradesman and creator of Data First Coaching

Why can a workshop be fully booked and still barely clear a wage?

Most mechanic workshop owners look at the booking sheet and the till at the end of the week and call it a good week if the hoists ran and the diary stayed full. That feeling is often wrong, because a full workshop and a profitable workshop are not the same thing.

A busy week of logbook servicing, roadworthy checks and fleet work can still blend labour rate against parts margin in a way nobody sees until the quarter is over. Apprentices flat out on the hoist, a technician flying through diagnostics, warranty work ticking along, all of it can look like a strong week on paper while the actual margin quietly goes missing. The booking sheet tells the owner how busy the workshop was. It does not tell them if the week was profitable.

Why does the yearly report from the accountant come too late to fix anything?

Most workshops only find out how the year really went once the accountant hands over the figures, and by then the damage is already done. A technician running over on a service or a diagnostic job eats into the labour rate margin silently, job after job, and nobody notices because the car still got fixed and the customer still paid.

Parts margin and technician wages also get booked in places on the profit and loss that do not reflect what actually happened on the hoist that day. A workshop can look solid all year on the surface, full bookings, steady fleet accounts, plenty of warranty work, and still barely clear a wage once the real numbers come through. Waiting twelve months to find that out means the same mistakes often repeat the whole year before anyone catches them.

What is job efficiency and why does it tell the truth your diary doesn't?

Job efficiency is the billable hours you actually charged against the hours the job took on the hoist. It is a different number from how full your diary looks, and it needs checking every week, not once a year, because a technician running long on diagnostics or a comeback job eats your labour rate margin before you ever see it on a report.

Operational efficiency is a second, separate number: billable hours against the total hours you paid for, including parts runs, warranty paperwork, scan tool time and apprentice supervision. A few fast jobs on one hoist can hide a day where the rest of the workshop's time never got sold at all. Checking both numbers weekly, data first rather than from memory or a gut feel about how the week went, is what lets a mechanic workshop owner catch the gap between busy and profitable while there is still time to do something about it.

What happens when a workshop prices every job differently?

Picture a mechanic workshop where pricing had always been set job by job, a bit different for a regular customer, a bit different again for a fleet account, with the labour rate drifting depending on who was standing at the counter. Nobody had sat down and checked whether those rates actually covered what the job cost to run.

Moving to one fixed price across every type of customer, including fleet accounts, with a solid rate increase built in, changed what the weekly numbers actually showed. Instead of guessing whether a week of roadworthy checks and services had covered the wages, the owner could see it clearly, and now reviews the cost of running the workshop every quarter rather than waiting for the accountant once a year.

What changes when AI agents check these numbers for you?

An AI agent is software that does a job the way you would do it yourself, using your prices, your wording and your rules. For a mechanic workshop, that means an agent can sit across the bookings, the labour rate charged per job and the parts margin on every invoice, and flag the week job efficiency or operational efficiency slips, without you building a spreadsheet to find it.

That matters because most workshop owners are not short on effort, they are short on time to check numbers while they are also running the front counter, approving extra work with customers and keeping apprentices moving between hoists. AI agents can take on that checking, consistently, every week, so the technicians and the service advisor spend their time on cars and customers, and the owner sees the real picture of the business instead of just how full the diary looked.

How does Data First Coaching approach this?

Data First Coaching starts from the mechanic workshop's own numbers, not from a description of how the week felt. Through the Trade Business Intelligence, Greg Allan looks first at job efficiency and operational efficiency together, and at how labour rate and parts margin are actually booked, because that is usually where a busy week and a profitable one come apart. Greg built his own trade business on this, and says plainly: “don’t just rely on your accountant to tell you if you've done well every year.” The how, working through a workshop's own figures week by week, is worked through inside the Academy, with members, because the Trade Business Intelligence is powered by every member, and the Academy is for owners open minded and willing to share what they learn.

Also asked

More questions owners ask.

How often should a mechanic workshop actually check these numbers?

Weekly, not at the end of the financial year. A single overrun on a diagnostic job or a service can eat labour rate margin quietly, and it only shows up fast if job efficiency and operational efficiency are checked every week rather than left for the accountant.

Can a mechanic workshop be fully booked and still be losing money?

Yes. A full diary and busy hoists show the workshop is busy, not that it is profitable. The gap between billable hours charged and hours actually paid for, including parts runs and apprentice supervision, is where the real answer sits.

Does this apply to a small workshop with just one or two technicians?

Yes. A smaller mechanic workshop feels the effect of a slipping labour rate or parts margin faster than a larger one, because there is less volume to absorb it. The same two numbers, job efficiency and operational efficiency, still tell the truth.

Where does Greg coach workshop owners from, if the workshop isn't local to him?

Greg coaches online, starting from the owner's own job and finance data, so the location of the workshop never changes how the coaching works. The numbers, not the postcode, are what guide the conversation.

Data First Coaching

Coaching That Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.