Articles

What numbers should a gasfitter check every week?

The two numbers worth checking every week are billable hours against hours actually spent on each job, and billable hours against total hours paid, including travel between callouts. For a gasfitter whose week mixes a quick leak detection callout with a half day cooktop install and a full day gas line extension, these two numbers show which jobs are funding the business and which are quietly eating the week's profit, long before the quarter proves it.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

Greg on videoTwo formulas every tradie must track weekly to stop losing profit

By Greg Allan, tradesman and creator of Data First Coaching

Why does a gasfitter's week look profitable on paper but not in the bank?

A gasfitter's invoice total for the week can look healthy while the bank account tells a different story, because a week built from a leak detection callout, a cooktop install and a gas line extension with subbed trenching earns very differently per hour, even when every job is priced and tracked the same way on the books.

Most gasfitters watch one number: invoiced total for the week against the quote book. That number hides the mix underneath it. A day spent on four short callouts, driving between a bayonet repair, a flue check and a carbon monoxide safety check, can invoice well but actually return very little once travel and the small, fiddly parts of each job are counted. A day on one hot water install can look smaller on the invoice and actually be the most profitable hour of the week. Looking at the weekly total alone, a gasfitter cannot tell which is which.

Why do a twenty minute callout and a full day install get tracked the same way?

Most gasfitters price a leak repair, a servicing visit and a full gas line extension using the same rough method, so the time actually sees the business treats every hour on the tools as equal, when a callout-heavy day and an install-heavy day have completely different costs sitting underneath them.

A short callout carries travel time, a pressure test, maybe a compliance certificate to write up, and a small parts cost. A long install carries materials, a subcontracted trench or electrical connection, and a full day on site for one customer. Priced and recorded the same way, a gasfitter's bookkeeping shows a tidy weekly figure that does not separate these two very different kinds of day. The gap only shows up once the quarter's figures are compared against what was actually banked, and by then it has already repeated for weeks.

What two numbers actually show where a gasfitter's week is leaking profit?

The two numbers to track each week are billable hours against hours actually spent on the job, and billable hours against total hours paid, including travel. Together they separate a day of quick callouts from a day on one install, and show exactly where the week's profit is being lost.

The first number tells you whether the time you quoted for a hot water replacement or a cooktop install actually matched the time it took on site, appliance by appliance. The second tells you what happens once travel between jobs, waiting on a meter reconnection or chasing a regulator for a sign-off gets added in. A week full of short callouts can post strong billable hours against job time and still look weak once travel is counted. A week on one or two installs usually does the opposite. Checked weekly rather than glanced at once a quarter, these two numbers tell you which type of week is actually funding your gasfitting business.

How does fixed pricing change what the weekly numbers tell a gasfitter?

Picture a gasfitter who had priced every job on a feel for the customer, a homeowner paying one rate, a builder on a project paying another, with no consistent method behind either. The weekly numbers never settled, because the price going in was never the same twice.

Moving to one fixed pricing structure across every customer type, including builders, with rates lifted to where they actually needed to be, changed what those weekly numbers could show. Once every leak repair, every cooktop install and every gas line extension is priced the same way regardless of who is paying, the billable hours numbers mean something consistent from week to week. Reviewing the cost of running the gasfitting business every quarter then becomes a real check against real numbers, not a guess layered on top of inconsistent pricing.

What do AI agents change about checking these numbers every week?

An AI agent is software that does a piece of office work the way you would do it yourself, using your prices, your wording and your rules. For a gasfitter, that means the weekly billable hours numbers can be pulled together without anyone in the business giving up an evening to chase job times across callouts, installs and compliance paperwork.

Most gasfitters do not skip checking their numbers because they do not care. They skip it because it is non-billable admin competing with a full diary of callouts, servicing and installs. AI agents can take on gathering job times, travel time and job type each week so the two numbers are sitting there ready, rather than buried across invoices and job sheets. This is data first: the numbers come from what actually happened on site and in the ute that week, not from memory of how busy it felt. Freed from the gathering, the gasfitter's time goes on deciding what to do about what the numbers show, not on finding the numbers in the first place.

How does Data First Coaching approach this?

Data First Coaching starts from a gasfitter's own job and finance data through the Trade Business Intelligence, not from a conversation about how the week felt. For this question, that means looking at billable hours against job time and against total hours paid across recent weeks, split by job type, to see where the real gap sits between callouts, servicing and installs, rather than guessing from the monthly invoice total. The how, the agents, the setup and the reports, is worked through inside the Academy, with members, because the Trade Business Intelligence is powered by every member for every member. It suits gasfitters who are open minded, innovative and willing to share what their own numbers show, so everyone in the Academy sees further.

Also asked

More questions owners ask.

Should a gasfitter track these numbers differently for LPG work versus natural gas work?

The two numbers, billable hours against job time and against total hours paid, work the same way for either. What usually differs is the travel and compliance paperwork around LPG bottle swaps or remote natural gas connections, which is exactly what the travel-inclusive number is there to catch.

Does a gasfitter need to check these numbers for every single job?

Checking them weekly across the mix of callouts, servicing and installs is enough to see a pattern. Chasing every single job individually becomes its own admin burden, which is part of why most gasfitters stop doing it after a few weeks.

What if the numbers show servicing and safety checks are the least profitable work?

That is useful to know, but it does not mean dropping that work. Servicing, safety checks and compliance certificates often keep a gasfitter's name in front of customers who later need a heater or hot water install, so the numbers need reading alongside what that work brings in later.

Can a gasfitter trust last quarter's figures instead of checking weekly?

Quarterly figures show that a gap existed, not where it started. By the time the activity statement or the bank balance looks light, the pattern behind it has usually been repeating for weeks across a mix of jobs that were never separated out.

Data First Coaching

Coaching That Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.