Articles

What numbers should a cabinetmaker check every week?

A cabinetmaker should check job efficiency (the hours quoted for a kitchen, wardrobe or vanity install against the hours the crew actually spent), operational efficiency (billable hours against every hour paid, including travel and site measures), and gross profit on jobs as they finish, not at year end. A full CNC and two install crews out can still hide a thin result once board, edging, hardware and labour are properly counted against the quote.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

Greg on videoTwo formulas every tradie must track weekly to stop losing profit

By Greg Allan, tradesman and creator of Data First Coaching

Why can a cabinetmaker's workshop be flat out and the bank balance still be thin?

A workshop can have the CNC running non stop, board being cut and edged all day, two install crews out on kitchens and wardrobes, and still end a quarter with barely anything left once everything is paid for. A full order book feels like proof the business is doing well. It is not proof of anything until someone checks what each job actually cost against what it was quoted to cost.

The gap shows up between board, edging and hardware invoices, labour on install day, and the price written on the quote months earlier. A cabinetmaker running flat out can be absorbing cost overruns on every kitchen without noticing, because the workshop looks busy and busy feels like healthy.

Why is the year end P&L too late to catch a job that ran long?

By the time the annual figures are done, the kitchen or vanity job that ran long is finished, the crew has moved on to the next install, and there is nothing left to fix. Lead times on board and hardware can stretch out for weeks, deposits get banked long before the final invoice, and the actual hours and material cost are locked in well before anyone looks at a yearly result.

Waiting for the BAS or the end of year P&L to find out whether the business made money means finding out after the mistake has already been repeated on the next three quotes. A cabinetmaker who only looks once a year is always looking backwards at jobs that are long gone.

What is job efficiency and why check it on every install?

Job efficiency is the billable hours a cabinetmaker charged for a job against the hours the job actually took. For a kitchen or wardrobe install, that means comparing the hours quoted for the install day against the hours the crew was actually on site cutting boards to fit, chasing hardware, or waiting on a builder to clear access.

Checked weekly, this number shows straight away if a vanity install that was quoted at one day is regularly running into a second, before the pattern repeats across the next ten jobs on the schedule. Checked once a year, it shows nothing except that something went wrong somewhere, sometime.

What is operational efficiency and why does it include the drive to site?

Operational efficiency is billable hours against every hour the crew is paid for, including the drive between a site measure and the workshop, time spent on shop drawings, and hours lost waiting on a client to sign off a design before the CNC can run. A cabinetmaker pays for all of that time even though none of it is charged on the quote as install hours.

For a joinery business, this is often where the real leak sits. A crew can be efficient once on site and still be unprofitable overall if too many paid hours go into travel, measures and waiting that the quote never accounted for.

How do you know if a quoted kitchen actually made money?

A quote with labour, board, edging and hardware split into neat lines can look profitable on paper and still lose its margin once the job is actually run. The profit built into a kitchen or wardrobe quote only survives if the job stays inside the hours and the material cost allowed for it.

Checking the actual gross profit on each finished job against what was quoted, weekly or monthly rather than once a year, is how a cabinetmaker catches a two pack finish that cost more than costed, or an install that ran a day long, before it quietly eats the margin on the next ten kitchens too.

Picture a cabinetmaker with the CNC booked solid and both install crews out every day of the week, who checks the numbers at BAS time and finds the busiest quarter in years barely covered the bills. Nothing in the workshop looked wrong. The gap was in hours and material cost against the quote, and nobody had been watching it.

What changes when AI agents take on these weekly checks?

An AI agent is software that does a job the way the owner would do it, using the owner's own prices, wording and rules. For these weekly numbers, an agent can pull job hours, board and hardware cost, and labour against the original quote the same way a cabinetmaker would check it by hand, without the owner having to sit down with spreadsheets after a long install week.

That matters because data first checking only works if someone actually does it every week. AI agents doing that non-billable comparison work means the owner's time goes back into quoting the next kitchen, running the site measure, or being on the tools, rather than chasing numbers that are already weeks old by the time they are pulled together.

How does Data First Coaching approach this?

Data First Coaching starts from the cabinetmaker's own job and finance data through the Trade Business Intelligence, not from a conversation about how busy the workshop has been. It looks at job efficiency, operational efficiency and real gross profit on finished jobs first, because a packed install schedule can sit right next to a thin result, and the numbers show which one is true.

From there, Greg Allan's coaching looks for where the gap actually starts, whether that is in how a job is quoted, how it is run, or where paid hours disappear before they ever reach a job. The how is worked through inside the Academy, with members, because the Trade Business Intelligence is powered by every member who joins open minded, innovative and willing to share.

Also asked

More questions owners ask.

Should a cabinetmaker check these numbers for every job or just the big kitchens?

Every job, including smaller wardrobe and vanity work, because small jobs with tight margins can erode a quarter just as easily as one big kitchen that runs long. The pattern across every job type is what shows where the real leak sits.

What if the workshop is efficient but the installs keep running over?

That split is common and is exactly why job efficiency and operational efficiency need checking separately. A cabinetmaker can be fast and accurate on the CNC and still lose margin on site through travel, access delays or hardware that arrives late.

Does this apply to a one person cabinetmaking business or only bigger joinery shops?

It applies from the first job on. A sole operator quoting, building and installing alone can lose exactly the same margin to an underquoted install day or mis-costed board, often with less room to absorb it than a bigger shop.

How often should a cabinetmaker actually look at gross profit, not just job hours?

Often enough that a run of underquoted jobs gets caught before it repeats across the next batch of quotes, rather than discovered once a year. The exact frequency and what to pull it from is worked through with the owner's own data.

Data First Coaching

Coaching That Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.