Articles

What numbers should a bricklayer check every week?

The number that matters most to a bricklayer each week isn’t the cash sitting in the account, it’s the gap between what a job was quoted at, per thousand bricks or day rate, and what the crew actually cost to run it, including the labourer’s mixing, loading out and scaffold time. Checked weekly, alongside the P&L, that gap shows whether brickwork and blockwork that looks busy is actually profitable, before a wet month or a run of retaining wall work exposes it.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

Greg on videoTwo formulas every tradie must track weekly to stop losing profit

By Greg Allan, tradesman and creator of Data First Coaching

What numbers should a bricklayer check every week?

The number that actually protects a bricklayer’s margin is the gap between what a job was quoted at, whether that’s a rate per thousand bricks or a day rate, and what the crew really cost to deliver it once the labourer’s mixing, loading out and scaffold time are booked against that job. Most brickies check the bank balance and call that “checking the numbers.” It isn’t.

A business can have bricks going up on three sites a week, the builder paying on progress as each stage is signed off, and still be quietly losing money, because the labourer hours spent mixing and loading out never get set against the job they belong to. They get buried in overhead instead, so the quoted margin on the job and the real margin drift apart without anyone noticing until it shows up at year end.

Why can a bricklaying business be flat out and still not make money?

A bricklaying business can be fully booked on brickwork and blockwork for builders all year, and still land on almost nothing once overheads are counted properly. That’s not a feeling, it’s what the P&L shows when it’s checked properly rather than assumed from a busy diary.

The pattern most owners miss is the labourer’s time. Mixing mortar, loading out, waiting on a scaffold lift, cleaning down at the end of a run, that time all belongs to a specific job, but it rarely gets booked against it. Instead it sits in general wages, spread across the whole business, so every job looks cheaper than it actually was to run. A retaining wall or a feature job with heavy cutting and extra scaffold moves can be the one quietly eating the margin that the straightforward face brick jobs built up.

What is job efficiency and why does it matter more than looking busy?

Job efficiency is the billable hours actually charged against a job compared with the real hours the crew spent delivering it, including the labourer’s time, not just the hours the bricklayer spent on the wall. This is the number memory gets wrong most often, because a site that felt efficient can still be bleeding hours nobody tracked.

When you check job efficiency weekly, you see whether the rate per thousand bricks or the day rate you quoted actually survived contact with the real job. A wall that went up fast but needed two extra labourer hours a day for load out and mixing can quietly erase the margin you built into the quote, even though the bricks went up on schedule and the builder was happy. If you only ever look at whether the job finished on time, you miss this. The hours tell the truth that the finished wall doesn’t.

What is operational efficiency and how is it different from job efficiency?

Operational efficiency is billable hours against every hour the crew is paid for across the week, including scaffold waiting time, weather days and the gap between one job and the next. It’s a separate number to job efficiency, and it catches something job efficiency can hide.

A few big, efficient jobs on brickwork and blockwork can make the business look healthy on paper while covering up a day that finished at two o’clock with no other job to charge the crew to. If you only ever look at how efficient the jobs themselves were, you won’t see the wasted half days that don’t belong to any job at all. Checking both numbers side by side each week is what shows whether the business is actually running tight, or whether good jobs are carrying bad weeks.

Why check the P&L every week instead of waiting for the accountant?

Waiting for the accountant means finding out once a year whether the season’s work actually turned a profit, by which point the money is spent and the pattern has already repeated itself through a whole run of jobs. Checking the P&L weekly means you see the drift between quoted margin and real margin while there’s still a job coming up where it can be fixed.

This is where an AI agent, software that does a piece of work the way you would, using your own prices, your own wording and your own rules, can take on the non-billable job of pulling the real hours against each job and laying them next to what was quoted. That’s office work, not bricklaying work, and it’s the kind of thing that eats into evenings when it’s done by hand. With AI agents doing that weekly reconciliation, you get the gap in front of you before the wet month or the awkward retaining wall job turns it into a real problem. That’s the whole point of a data first view of the business: the numbers come from the jobs themselves, not from memory of how the week felt.

What happens when a bricklayer prices every job differently?

Picture a bricklaying business where pricing has always been set job by job, a bit higher for a tricky retaining wall, a bit lower for a builder who sends regular work, with no fixed line anywhere. Over time the rates drift away from where they actually need to be, because every quote is a fresh negotiation instead of a number checked against real cost.

Moving to fixed pricing across every type of customer, including the regular builders, with the rate increase that the real job costs justified, changes the conversation. It also changes the habit: reviewing what it actually costs to run the business each quarter, rather than once a year, becomes part of how pricing is set, so the rate per thousand bricks or the day rate keeps pace with what the crew, the scaffold and the labourer’s time really cost.

How does Data First Coaching approach this?

Data First Coaching starts from the bricklayer’s own job and finance numbers, run through the Trade Business Intelligence, rather than from a description of how the week felt. For this question, that means looking first at the gap between quoted rate and real job cost, including the labourer’s hours, because that is usually where the problem starts, not in the bank balance or the accountant’s year end report. As Greg puts it, “don't just rely on your accountant to tell you if you've done well every year.” The how, the systems and the weekly checks, is worked through inside the Academy, with members, because the Trade Business Intelligence is powered by every member for every member, and the Academy is built for owners who are open minded, innovative and willing to share what they learn.

Also asked

More questions owners ask.

Should a bricklayer check these numbers before or after invoicing the builder?

Before. If the gap between quoted rate and real job cost is only checked after the invoice goes out, there’s nothing left to adjust on that job. Checking it while the job is still running, or straight after, is what lets the next quote reflect what the labourer and scaffold time actually cost.

Does this apply to subcontract work as well as jobs quoted direct to the owner?

Yes. Whether the work is subcontracted to a builder or quoted direct, the same gap applies: a rate per thousand bricks or a day rate only holds up if the labourer’s mixing and loading out time is booked against that job, not spread across the business as general overhead.

Why does weather matter to these numbers for a bricklayer specifically?

Weather days hit operational efficiency hardest because the crew is still paid while no brickwork or blockwork goes up. A bricklaying business that only tracks job efficiency on the days it did lay brick can miss how many paid hours a wet run actually cost across the week.

Is checking the P&L weekly realistic for a small bricklaying crew?

It’s realistic once the data is coming from the jobs themselves rather than being pulled together by hand. That’s the kind of non-billable office work an AI agent can take on, so a small crew can see the real P&L weekly without the owner losing an evening to it.

Data First Coaching

Coaching That Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.