By Greg Allan, tradesman and creator of Data First Coaching
Is building pools more profitable than servicing them?
Neither a concrete pool build nor a servicing round is automatically more profitable; the real difference only shows up once every cost is counted against each type of work. A pool builder who compares the dollar value of a big build against a maintenance round without weighing in excavation delays, warranty callbacks and chemical costs is comparing two numbers that do not mean what they look like they mean.
Many pool builders feel the build side is the real work: the fibreglass or concrete pool going into the ground, the pool fence going up, the council approval ticked off, the compliance certificate signed. Servicing can feel like the unglamorous side, chasing water testing, swapping a filter or chlorinator, topping up chemicals on a maintenance round. But feeling is not margin. A build that drags through council approval delays, then needs a warranty callback on the pump or heating weeks after handover, can quietly cost far more than the quote ever recovered. A servicing round with tight routes and consistent chemical charges can return a steadier result than the big job everyone was excited about.
Why does a strong season still leave the bank account thin?
A pool builder can come out of the summer season having run flat out on builds and servicing rounds and still find the bank balance does not match the effort, because overheads sit on whichever jobs are the least profitable once the rush fades and the mix has never been checked.
Picture a pool builder whose servicing round had grown to fill every gap in the diary: small jobs, short-notice chemical top-ups, one-off filter swaps for customers who were never really worth chasing. The round kept the ute moving and looked busy on paper, but it ate the hours that should have gone to quoting bigger work, and it left the crew with no breathing room between jobs. The shift came when he started raising prices on the servicing side and filtering out the low-value callouts, pointing the week instead towards the work that reliably returned a strong day rate. Nothing about the tools or the trade changed, only which jobs were allowed onto the schedule.
What number actually tells a pool builder the truth about the mix?
The number that tells the truth is your gross profit margin on each job type, blended across build and servicing work for the period, not the markup you put on the quote or the total revenue for the month. Markup tells you what you charged; blended gross profit margin tells you what you actually kept once materials, labour, chemicals and callbacks are taken out.
Pricing a concrete pool build the same way you price a chlorinator swap, by adding a flat markup onto cost, overstates what actually lands in the account. A healthy-looking markup on the quote can still return a smaller real margin once it is measured properly, and that gap widens every time a build runs long or a service job needs a return visit that was never charged for. When your build and servicing work are blended together in one monthly number, a strong run of maintenance rounds can mask a build that quietly lost money, and you would never see it without checking the two sides separately and together.
How do you check margin at the moment you are quoting, not after the job?
You check it by looking at gross profit margin while you are still building the quote, not when the invoice is reconciled weeks later, and by giving the customer a good, better, best set of options so the job that gets booked is the one that protects your number, not just the one that was asked for.
A pool fence quote, a resurfacing job, a full concrete pool build, each carries its own real cost once excavation, equipment hire, chemicals and the warranty risk are counted in. Presenting a single price leaves no room to protect margin if the customer wants to negotiate. Presenting a staged set of options, built from what the job actually needs, lets the conversation move towards the version that keeps your margin intact, and ends with a date booked in the diary, not a quote sitting in an inbox.
What changes when AI agents take on the office side of this?
An AI agent is software that does a piece of office work the way you would, using your prices, your wording and your rules, so quoting, job costing and chasing warranty paperwork can happen without eating into billable hours on site. For a pool builder juggling build jobs and a servicing round, that means the margin check happens on every job, not just the ones there is time to look at closely.
Most pool builders do not skip checking margin because they do not care, they skip it because between excavation, council approval, a maintenance round and water testing calls, there is rarely a spare hour to sit down and work it out job by job. AI agents can pull the real cost of a build or a service call together the way the owner would do it themselves, flag when a quote's margin has slipped below where it should sit, and keep that check running data first, from the business's own numbers, rather than from memory of how the last big build felt. That is what lets a pool builder see the blended picture across build and servicing work without it becoming another evening task.
How does Data First Coaching approach this?
Data First Coaching starts from a pool builder's own numbers, not which side of the business feels more satisfying to work on. Greg Allan looks first at the blended gross profit margin across build and servicing work, through the Trade Business Intelligence, to see where the gap between quoted price and real return actually starts, whether that is excavation delays, warranty callbacks, chemical costs, or jobs priced on markup instead of margin. The how, the systems that check margin at the point of quoting and keep the mix honest, is worked through inside the Academy, with members, because the Trade Business Intelligence is powered by every member and the Academy is for pool builders who are open minded, innovative and willing to share what they learn.

