Articles

Should a fabrication business hire a qualified welder or an apprentice first?

A fabrication business should hire a qualified welder or fabricator first, not an apprentice, because the owner does not have the spare hours to teach shop drawings, weld procedures and certification requirements while still quoting and running the shop. An experienced first hire can run a job on the shop floor or a site install unsupervised, which lets the owner bring on an apprentice safely later, alongside someone who already knows the trade.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

  • Data first coaching
  • Your nights back
  • Every job priced to make money
  • 9,000+ owners trained
  • Greg is the only coach
  • 20 years in trade, 10 coaching
  • Beat 9pm
  • Places are limited
Greg on videoYour first hire in any role must be experienced

By Greg Allan, tradesman and creator of Data First Coaching

Should a fabrication business hire a qualified welder or an apprentice first?

Hire the qualified welder first, not the apprentice, every time your first hire is going into a key trade role. The owner doing the quoting, the shop drawings, the cutting list and the client calls does not have the hours left in the week to also teach someone how to read a drawing, set a weld procedure, or understand certification requirements on structural steel. That teaching load lands on top of the work already filling the day.

A qualified fabricator who already knows the trade can be handed a job and trusted to run it, in the workshop or on a site install, with little supervision. An apprentice, however keen, needs someone standing over them for a long stretch before that is true. Bring the apprentice in once there is an experienced fabricator already on the tools for them to learn alongside, not before.

Why does hiring an apprentice first cost a fabricator more than it saves?

An apprentice looks like the cheaper option on the wages line, and that is usually the reason an owner reaches for one as the first hire. The problem is what the wage saving does not show: the owner still has to run the quoting, chase the powder coat and galvanising lead times, manage the client, and now also train someone on cutting, folding and welding from scratch.

Most owners in this position find the training eats the very hours the hire was meant to free up. The apprentice cannot yet be trusted alone on a balustrade or a gate without the owner checking the work, so the owner stays tied to the shop instead of getting free to quote the next job or chase the next builder.

What happens when the first hire can't read shop drawings or pass a weld test?

The cost of getting this first hire wrong rarely shows up as a slow learning curve. It shows up as rework on a balustrade that has to be reground and refitted, a weld test that fails and has to be redone on the customer's time, and stainless that is wasted as offcut because a cut was marked wrong off the shop drawing.

It also shows up as a builder on the phone, chasing a missed site install date because the job that should have gone out the door is still on the bench. A business running on thin margins in structural and architectural steel cannot absorb that kind of rework and still make its number on the job.

What does the right first hire look like for your workshop?

Look for the fabricator who already knows what they are doing before they walk in the door, not the one who is cheapest on paper. That means someone who can read shop drawings unsupervised, set a weld procedure correctly, handle aluminium and stainless as well as mild steel, and manage their own quality on a site install without you standing over them.

The number that tells you whether you are ready for this hire sits in your own job costing: how much of your week is already tied up quoting, chasing suppliers and checking other people's cutting and folding. If that number is high, the first hire has to take weight off you immediately, and only an experienced fabricator can do that from day one.

How do you know when it's time to bring an apprentice into the crew?

Picture a fabricator running a workshop with two qualified tradespeople on the tools, both paid at the qualified rate, both capable of the same jobs. It is a costly way to staff the work when one of those roles could be filled by someone still learning, at a different cost, without losing the quality the business is known for.

He restructures the crew so one qualified welder now works alongside a second-year apprentice, instead of carrying a second full qualified wage. The qualified hand is still there to check the weld, read the shop drawing and sign off the certification on structural steel, so nothing in the quality drops. The apprentice learns the trade on real jobs, alongside someone who already knows the trade, not from an owner who is meant to be quoting the next one.

Can AI agents help you get this hiring decision right?

An AI agent is software that does a job the way you would do it yourself, using your prices, your wording and your rules, for work that does not need a person doing it. In a fabrication business that can mean chasing the powder coater for a completion date, following up a quote sitting with a builder, or keeping the job costing up to date so you can see where the hours are actually going.

Used data first, agents do not decide who to hire. What they do is free up the owner's week enough to properly interview, check references and vet the first hire into a key role, rather than rushing the decision because the shop is drowning and any pair of hands feels better than none.

How does Data First Coaching approach this?

Data First Coaching starts by looking at where your week is actually going, not at the plan in your head for what a new hire will fix. The Trade Business Intelligence reads your own job costing and quoting data, alongside years of coaching fabrication and trade businesses, to show whether the real problem is hiring order, pricing, or the owner still doing work a hire should already be doing.

Greg Allan is open that this was his own costly mistake before the Academy existed: “I hired an apprentice first. And then I couldn't grow.” The how, the sequence, the vetting, the numbers that say when a shop is ready, is worked through inside the Academy, with members who are open minded, innovative and willing to share what they learn, because the Trade Business Intelligence is powered by every member.

Also asked

More questions owners ask.

Should the first experienced hire start full time, or is it worth trialling them as a subbie first?

Some fabricators test fit by bringing an experienced welder in as a subbie on a job or two before committing to a wage. The data worth checking first is how much quoted work is already sitting waiting on crew capacity, since that tells you whether the role needs filling now or can wait.

What if an experienced welder costs more than the shop can currently afford?

The real question is rarely the wage figure alone. It is whether there is already enough quoted and backlogged work sitting on the books to carry that wage, which is something the owner's own quoting and job data shows, not something to guess from the pay rate.

Does this hiring order change for an aluminium or architectural fabricator rather than structural steel?

No. The principle is about the role, not the material. Whether the work is aluminium shopfronts, stainless balustrades or structural steel, the first hire into a trade seat still needs to already know the material, the fabrication methods and the certification world that role carries.

How many apprentices can one experienced fabricator properly supervise at once?

Loading too many apprentices onto one experienced hand can slow output and bring the same rework risk back in through the side door. The ratio of experienced to learning hands in the workshop matters as much as getting the hiring order right in the first place.

Data First Coaching

Coaching That Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.