Articles

How do I stop install days blowing out as a cabinetmaker?

Install days blow out because a cabinetmaker's job card only tracks whether the kitchen or wardrobe got fitted, not the full day paid: travel to site, waiting on the builder to clear the room, the run back to the workshop for a missing hinge or offcut. The number that tells the truth is buildable hours against hours actually paid for the day, not against hours on the tools alone.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

  • Data first coaching
  • Your nights back
  • Every job priced to make money
  • 9,000+ owners trained
  • Greg is the only coach
  • 20 years in trade, 10 coaching
  • Beat 9pm
  • Places are limited
Greg on videoWhy 150% job efficiency can still lose you money

By Greg Allan, tradesman and creator of Data First Coaching

Why does the install day always run over, even when the kitchen went in fine?

A cabinetmaker quotes install day as one line in the job, and once the cabinetry is in and the invoice goes out, the job looks finished and on budget. What the job card does not show is the two hours lost waiting for the builder to clear the room, the drive back to the workshop for a forgotten hinge pack, or site access that was promised and never delivered. That gap between what the day looked like and what it actually cost is where the profit on install day quietly disappears, job after job, without ever showing up as a single bad day.

Why can a job look efficient on paper and still lose money on the day?

Most cabinetmakers track whether the vanity or wardrobe install took the hours it was quoted, and if it came in under that, the job looks like a win. But the cost that matters is the full day paid, not the hours actually spent fitting doors, drawers and benchtops. A two pack kitchen install can be finished faster than quoted and still run over, because travel to site, waiting on the builder, and a run back to the workshop for missing board, hardware or edging all get paid for but never counted against the job.

What number actually shows whether an install day made money?

The number that tells the truth about an install day is not the quoted time against the time on the tools. It is the hours you could actually be building against every hour your crew was paid for that day, including the drive out, the wait on site, and the run back to the workshop for a missing offcut. When you look at install days this way, a day that felt fine can show itself as the one quietly eating your margin, while a day that felt rushed might have protected it. This is what data first coaching starts with: not a feeling about how the day went, but what it actually cost against what it earned.

How can AI agents stop the small things that eat an install day?

An AI agent is software that does a job the way you would, with your prices, your wording and your rules. For a cabinetmaker, AI agents can check that the hardware pack, the edging offcuts and the shop drawings are confirmed against the site measure before the van leaves the workshop, or flag to the builder that the room needs to be clear before the install crew is booked. The job cannot move on to install day until the information that normally causes the hold up is actually there, which is where a lot of the lost hours start.

What does it look like to run install days on your own system instead of juggling apps?

Picture a cabinetmaker running quotes in one app, invoices in another, timesheets on paper in the van, and stock levels really only known by whoever opened the workshop that morning. Install day details, the hardware pack, the final shop drawing, who is meant to be on site, live in different places, so nothing joins up until something goes wrong on the day itself.

Some cabinetmakers choose to have a system built on their own job data instead, bringing quotes, invoices, customer records, scheduling, timesheets, warehouse stock and a live view of where the install crew is into one place, shaped around how their own jobs and customers actually run rather than rented software built for every trade at once. Off-the-shelf scheduling or job management tools suit some cabinetmaking businesses well, and it is the data on how install days actually run that shows which tools are worth keeping and which are quietly costing more in gaps than they save in convenience.

How does Data First Coaching approach this?

Data First Coaching starts by looking at what an install day actually costs against what it is quoted at, using the cabinetmaker's own job and timesheet data through the Trade Business Intelligence rather than a general rule of thumb. Greg Allan teaches that the real number is “buildable hours for the day divided by hours paid or on the tools”, and that “that includes from the moment you're driving out to the job and coming back”, so travel, waiting on site and the run back to the workshop are never left out of the picture. From there the coaching looks at where in that day the business actually loses its margin, rather than treating every overrun the same. The how of building that into the business is worked through inside the Academy, with members, because the Academy is for owners who are open minded, innovative and willing to share what they learn with each other.

Also asked

More questions owners ask.

Is this really about the install itself, or something else?

Usually something else. A cabinetmaker's crew can fit a kitchen or wardrobe faster than quoted and the business can still lose money on the day, because the cost that counts is the full day paid, not just the hours spent actually fitting.

Does this matter for a small vanity install, not just a full kitchen?

Yes. Travel, waiting on site access and a run back to the workshop for missing hardware eat into a vanity or wardrobe day just as much as a full kitchen, often proportionally more because the job itself is smaller.

What about install days held up by the builder, not the cabinetmaker?

Those days still cost the business the full day paid, even though the delay was not caused by the cabinetmaker. Seeing that in the numbers is what lets it be addressed with the builder or priced into the job, rather than quietly absorbed.

Will a scheduling app on its own fix install day blowouts?

Some scheduling or job management tools help, and others add extra steps without solving the gap. Looking at the cabinetmaker's own install day data shows which tools are actually closing the gap and which are not.

Data First Coaching

Coaching That Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.