Articles

How do I get off the tools as a stonemason?

A stonemason gets off the tools by tracking the exact split between hours spent cutting, polishing, templating and installing stone, and hours spent quoting and scheduling the next benchtop, cladding or restoration job for builders and kitchen companies, because that split shows where growth is actually stalling. Growth often stops once a stonemason with a first hire is still on the tools more than about twenty hours a week, and that hire, backed by AI agents handling quoting and admin, is what breaks the ceiling.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

  • Data first coaching
  • Your nights back
  • Every job priced to make money
  • 9,000+ owners trained
  • Greg is the only coach
  • 20 years in trade, 10 coaching
  • Beat 9pm
  • Places are limited
Greg on videoWhy your first three hires unlock everything else

By Greg Allan, tradesman and creator of Data First Coaching

Why does staying on the tools stop a stonemason business growing?

Staying on the tools stops a stonemason business growing because every hour spent cutting a slab, templating a kitchen or polishing a benchtop is an hour the next quote does not go out. Behind every run on the CNC, the quoting and scheduling for the builders and kitchen companies waiting on an answer quietly piles up. The workshop looks busy and the saw never stops, but the business itself is not moving.

Most stonemasons got into the trade for the craft of working natural stone and engineered stone, not for quoting. Greg teaches that once a stonemason with a first hire on board is still on the tools more than about twenty hours a week, growth tends to stall, because the hours that should go to quoting the next benchtop, cladding or restoration job instead go to fabrication and install. The owner is still breathing workshop dust and watching the silica controls rather than running the business.

What is really piling up behind the saw while the owner is on the tools?

What piles up behind the saw is not a shortage of jobs, it is the quoting and scheduling for multi-material work, benchtop packages with builders, cladding and paving jobs, restoration and the odd memorial, all waiting on the one person who is also running the CNC. The backlog is the symptom, not the cause.

Greg describes this as a climb and a slide. The owner climbs up, catching up on quoting and templating admin after a stretch on the tools, which generates more install and fabrication work. Then the business slides straight back down because there is no one else to cut, polish or install the stone that work created. It looks like progress, but it is a wheel the stonemason spins on rather than a business that is actually growing, until a hire or a different way of working breaks the cycle.

What number actually tells a stonemason when it is time to get off the tools?

The number that matters is the real split, in a given week, between hours on the saw, the template and the install, against hours spent quoting, scheduling and following up builders and kitchen companies. Memory of "flat out all week" is not the same as that split, and it is usually wrong in the owner's own favour.

A data first look at your own job and quoting numbers, rather than a gut feel about how busy the workshop sounds, usually shows the real pattern: fabrication and install hours crowding out quoting hours, and quotes for the next three jobs sitting unsent while the current slab is on the bench. That number, tracked properly, tells you whether you are actually running the business or just running the saw.

Which hire actually gets a stonemason off the tools?

The hire that gets you off the tools is your first stonemason or offsider, someone capable of running the CNC, cutting, polishing and installing while you quote, template the next job and manage the builders and kitchen companies who keep the pipeline full. Hiring a bookkeeper or an apprentice who still needs supervising does not touch this ceiling, because the hours crowding out your quoting are workshop and site hours, not office hours.

Once that hire is in place and genuinely taking fabrication and install hours off your week, rather than just helping you go faster on the tools, the twenty hour mark starts to mean something. Below that, with the rest of your week going to quoting, templating diaries and site relationships, is roughly where the climb and slide cycle starts to loosen its grip.

How can AI agents take the quoting and scheduling off your plate?

An AI agent is software that does a piece of office work the way you would do it yourself, using your prices, your wording and your rules, so quoting and scheduling can move even while you are mid install or mid pour. For a stonemason that means the enquiry from a kitchen company, the template booking, the slab and benchtop quote and the follow up can be moving before you are back from site.

Picture a stonemason business running its quoting and scheduling across two separate off-the-shelf tools, neither built for how stone work actually moves from lead, to template, to fabrication and CNC cutting, to install, to final invoice. The owner eventually had his own quoting and job system built from scratch around his own pricing and his own pipeline, covering everything from the first enquiry and template appointment through deposit, stone order and install to final invoice and payment. Some off-the-shelf tools still suit parts of a stonemason's business well, and the data from your own quoting and job records shows which ones earn their place and which ones are quietly costing you hours. AI agents built around how your business actually quotes, templates and schedules are what let the owner be on site or in the workshop without the pipeline going quiet behind them.

How does Data First Coaching approach this?

Data First Coaching starts with your own job and quoting numbers through the Trade Business Intelligence, not with you explaining your workshop and your week from memory. For a stonemason, that usually means looking at the real split between tools hours and quoting hours, and tracing the quoting and scheduling backlog back to where it actually starts, rather than treating it as a staffing problem or a marketing problem on the surface. Greg Allan describes the pattern plainly: “You literally climb up and then you slide back down.” The how, including which hire, which agent and which systems fit your business, is worked through inside the Academy, with members, because the Trade Business Intelligence is powered by every member for every member, and that is why who joins matters.

Also asked

More questions owners ask.

How many hours a week should a stonemason be on the tools before it becomes a problem?

There is no fixed figure for every business, but growth often stalls once a stonemason with a first hire is still on the tools more than about twenty hours a week. The exact point depends on the mix of fabrication, install and templating against quoting hours in that owner's own numbers.

Is hiring another stonemason the whole answer?

Not on its own. The right hire takes cutting, polishing and install hours off the owner's week, but the quoting and scheduling backlog behind the saw often needs a different fix, such as AI agents handling the admin, or the cycle of catching up and sliding back onto the tools simply repeats.

Does getting off the tools mean a stonemason stops doing stonework altogether?

No. It means the owner's time on the CNC, templating and install is a choice rather than the only option, because someone else and some agents can carry the quoting, scheduling and routine fabrication work that would otherwise pull the owner straight back onto the saw.

What if the business is too small for a second hire right now?

That is exactly where looking at the owner's own data first matters, rather than guessing. The split between tools hours and quoting hours, and the gross margin on fabrication versus install work, usually shows whether the next move is a hire, an agent, or tightening what is already there.

Data First Coaching

Coaching That Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.