Articles

How do I find and keep good machine operators for my earthmoving business?

Finding and keeping good machine operators for an earthmoving business comes down to knowing the true cost of putting them on the excavator or bobcat each day, not just their wages. Float time, wet days and servicing eat into paid hours, so an earthmoving contractor who tracks billable machine hours against total hours paid can see what an operator really earns the business, hire with intent, and build the support that keeps a good operator through the quiet months.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

  • Data first coaching
  • Your nights back
  • Every job priced to make money
  • 9,000+ owners trained
  • Greg is the only coach
  • 20 years in trade, 10 coaching
  • Beat 9pm
  • Places are limited
Greg on videoTwo formulas every tradie must track weekly to stop losing profit

By Greg Allan, tradesman and creator of Data First Coaching

Why do good operators keep leaving earthmoving businesses?

Most earthmoving contractors put it down to wages, or a thin pool of licensed operators in their area. That is rarely where it starts. A good operator can feel when the business around them is guessing, when a site cut runs long and nobody knows if the day was profitable, when the float between jobs eats the morning and nobody accounted for it.

An operator who turns up every day to work that feels disorganised, underpriced or unstable eventually leaves for a business that seems to have its act together, even if the pay is similar. The business that loses operators is usually the one that cannot show them steady, well costed work through the quieter months, not just the one paying the least.

Is the real problem wages, or the way the business counts hours?

For most earthmoving contractors, it is the second one. An excavator or bobcat sitting on a float, waiting out a wet day, or booked into servicing is still costing wages, fuel and plant finance, but it is not earning a dollar on site. If the business cannot separate billable machine hours from total hours paid, every job absorbs a slice of cost that has nothing to do with that job.

That makes site cuts, trenching and bulk earthworks all look tighter than they are, which pushes owners toward cutting operator pay, chasing cheaper dry hire, or quoting lower to win work, all of which make keeping a good operator harder, not easier.

What does it actually cost to put an operator on the machine for a day?

You need one number before any hiring or retention decision: billable machine hours against total hours paid, including float, wet days and servicing. That is the number that tells you what an operator truly costs the business and what they earn it back, rather than a guess based on the invoice you sent the civil contractor last month.

Picture an earthmoving contractor who could never get an honest cost of operations figure. Every job looked unprofitable once overhead was spread across it, because non-billable hours, float, wet days, servicing, were loaded onto whatever job happened to be running that week. Stripping those hours out the other way made the figure look far too low to be real. Neither number was the truth. An AI agent, software that does a task the way the owner would, with their own wages, overheads and rules, pulled the actual wages and overhead straight from the business's live data and worked out the true cost of operations with billable hours properly factored in. Overhead now sits in its own bucket instead of being spread thin across every job, and the agent keeps that costing current as the business changes.

That is a data first way to answer a wages and hiring question, because it starts from what the business actually spent and earned, not from memory of a tough week.

How do you hire an operator with intent instead of under pressure?

You hire slowly, checking two things before you make an offer: can this person run the excavator or bobcat the way your sites need it run, and will they fit the crew you already have. Filling a seat because a tipper is sitting idle or a civil customer is chasing a start date almost always costs more later than waiting another week or two for the right fit.

An earthmoving contractor who hires under site pressure tends to repeat the same cycle: a quick hire, a few months of friction, a resignation, and the search starts again with less time than before. Hiring with intent breaks that cycle because it is built on the true cost figure, not on who is available this week.

What keeps a good operator once you've hired them?

A good operator stays where there is a structure around them, not just a machine and a job list. That means clear information on what each job needs, honest costing so they are not being pushed to cut corners on rock breaking or drainage work to hit an unrealistic margin, and a plan for the quiet months so wet weather or a slow season does not turn into a stood down roster with no notice.

Earthmoving contractors who keep their best operators longest are usually the ones who can show them, with real numbers, that the business knows what it is doing through fuel costs, tipping fees, servicing schedules and the wet hire versus dry hire decisions that affect everyone's hours.

Can AI agents actually help with this, or is it just more software?

AI agents can take on the ongoing, non-billable tracking that most earthmoving contractors never get to: keeping machine hours, float time, servicing and wet days updated against wages as the weeks go by, instead of a one-off calculation done at tax time. An agent does this the owner's way, using their own prices, their own crew and their own rules, so the figure stays true as fuel costs or servicing schedules change.

That frees the owner to spend time with the operator and the crew instead of buried in spreadsheets, which is its own part of keeping a good operator around.

How does Data First Coaching approach this?

Data First Coaching starts from the earthmoving contractor's own numbers through the Trade Business Intelligence, not from a conversation about wages or advertising. The first thing looked at is billable machine hours against total hours paid, because that is usually where the real problem with hiring and keeping operators starts, not where it shows up. Greg Allan teaches owners to “higher slowly, fire quickly, higher slowly, higher with intent” and to keep good operators by “building a foundation of support” around them. The how of building that costing and that support is worked through inside the Academy, with members, because the Trade Business Intelligence is powered by every member who is open minded, innovative and willing to share what they learn.

Also asked

More questions owners ask.

Should an earthmoving contractor pay more to keep a good operator?

Pay matters, but it rarely saves a wobbly hire on its own. An operator who sees honest costing, steady work through wet days and a plan for the quiet months often stays for reasons beyond the hourly rate, which is why the business's own numbers matter more than matching a competitor's offer.

Is it better to use dry hire operators instead of hiring permanently?

That depends on what your billable machine hours against total hours paid actually show for your site mix. Some earthmoving contractors genuinely suit a dry hire model, others lose margin and control doing it, and the honest cost figure is what tells you which one you are.

How many operators should a growing earthmoving business carry before the next hire?

There is no fixed number that fits every earthmoving contractor, because it depends on float time between sites, servicing downtime and how much of your plant is sitting idle versus earning. The real answer sits in your own job and machine data, not in a rule of thumb.

What warning signs suggest an operator is about to leave?

Watch for an operator asking fewer questions about upcoming jobs, taking longer on servicing or breakdown days, or going quiet about future site cuts and bulk earthworks on the books. These often follow a period where the business could not show them stable, well costed work.

Data First Coaching

Coaching That Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.