Articles

How can locksmiths manage van stock without losing money?

Van stock usually loses a locksmith money not because stock goes missing, but because what gets used on a rekey, lock change or emergency callout and what gets invoiced for it quietly drift apart over weeks of jobs. The number that tells the truth is the gap between stock taken off the van and stock billed to the customer, tracked job by job rather than guessed at during an annual stocktake.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

  • Data first coaching
  • Your nights back
  • Every job priced to make money
  • 9,000+ owners trained
  • Greg is the only coach
  • 20 years in trade, 10 coaching
  • Beat 9pm
  • Places are limited
Greg on videoWhy 150% job efficiency can still lose you money

By Greg Allan, tradesman and creator of Data First Coaching

Why does van stock keep losing money even when every job gets invoiced?

Most locksmiths assume that if every callout gets an invoice, the stock on the van is looking after itself. In practice the cylinders, blanks, deadlocks and digital lock hardware used on the job and the parts actually billed to the customer can drift apart week by week, and nobody notices until the shelf looks lighter than it should.

A rekey on a strata job might use two extra cylinders because the first set did not match the old master key system. A lockout at two in the morning might get finished with whatever is on the van rather than the exact part that was charged. None of this shows up as theft or a mistake. It shows up months later as a margin that has quietly eroded, and by then nobody can say which job it started on.

What does it really cost a locksmith when the right part isn't on the van?

The cost is rarely the part itself. It is the second trip, the delayed job, and the customer who was promised an after hours fix and now has to wait while the locksmith drives back to the shop for a cylinder, a digital lock or a restricted key blank that should have been on the van.

For a locksmith doing commercial work, access control jobs or real estate turnovers for a property manager, that delay is the thing the customer actually judges. A missed part on an emergency callout does not just cost the locksmith the trip. It can cost the relationship with the agency or the strata manager who expects the job finished in one visit, and who has other locksmiths they could call next time.

What number actually shows whether van stock is making money or costing it?

The number that matters is not how much stock sits in the van or the shelf at any one time. It is the gap, job by job, between what stock was used to complete the job and what stock was billed for it, because that gap is where margin leaks out without anyone deciding to let it.

A stocktake once a quarter tells you what is missing today. It cannot tell you which job, which cylinder type or which kind of call, a rekey, a commercial lock change, a safe job, is the one quietly costing margin every time it happens. That answer only sits inside your own job data, checked job by job rather than remembered at the end of the month.

This is data first thinking: instead of starting from a feeling that stock control is getting away from you, you start from what your own jobs actually show, and let that point to where the real problem begins.

How do AI agents help a locksmith keep van stock under control?

An AI agent is software that does a job the way you would, using your prices, your wording and your own rules, instead of a person having to do it by hand every week. For van stock, that means an agent can sit between the job sheet and the invoice, matching what was used against what was billed, the way you would check it yourself if you had the time.

Used well, AI agents can flag the rekey that used more cylinders than it billed for, or the digital lock job where the part on the invoice does not match what left the van, before it becomes a pattern across every security door and lock change job you run. The office work of reconciling stock, instead of eating into the locksmith's evening, gets done in the background, and the time saved goes back into the next callout or the next quote.

How do you make sure every part on the van earns its margin before it leaves the shelf?

You protect margin at the moment you quote the job, not at the end of the month when the bookkeeping gets done. When a customer calls about a lockout, a master key upgrade or an access control install, the gross profit on that job is already decided by the price you set and the parts you expect to use, before a single cylinder leaves the van.

Presenting a good, better, best option, a basic lock change, a rekey with an upgraded cylinder, or a full access control or digital lock solution, lets the customer choose the job that suits them while you protect the margin on every option. Ending that conversation with a booked date rather than a quote left sitting in an inbox means the stock allocated to that job gets used and billed the same day, not weeks later when nobody remembers what was quoted.

How does Data First Coaching approach this?

Data First Coaching, built by Greg Allan, starts from the locksmith's own job and finance data through the Trade Business Intelligence, not from a description of how the van is stocked. It looks first at where the gap between stock used and stock billed actually begins, whether that is in rekeys, emergency callouts, commercial fit outs or safe work, because that is where the real problem sits, not in the stocktake itself.

The how, which agents to build and where to place them in your own job flow, is worked through inside the Academy, with members. It is built for locksmiths who are open minded, innovative and willing to share what they learn, because the Trade Business Intelligence is powered by every member, for every member.

Also asked

More questions owners ask.

Should a locksmith count every key blank and screw as van stock?

Counting every small item rarely pays for the time it takes. The parts worth tracking closely are the ones with real cost or security weight, cylinders, digital locks, restricted key blanks and safe parts, where a gap between use and invoice actually moves your margin.

Does restricted key stock need different handling to normal van stock?

Restricted key systems carry a compliance and security responsibility beyond cost control, since they are tied to a registered system and a customer's access rights. The stock discipline is similar, but the record of who received a restricted key matters as much as the margin on it.

Can a solo locksmith with one van justify any of this?

A one person locksmith business often loses the most margin quietly, because there is no second set of eyes checking the van against the invoice. The data first approach works from whatever job history exists, even one van's worth.

How does strata and real estate work change van stock planning?

Property manager and strata jobs often come in batches, several lock changes or rekeys across one building, which can hide a stock gap inside a single invoice. Tracking by individual unit rather than by the whole job shows where margin actually moves.

Data First Coaching

Coaching That Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.