Articles

How should gasfitters price callouts and afterhours work?

A gasfitter should price an afterhours callout as scarcity, not inconvenience: the real cost of wages, vehicle, compliance and the gross profit margin the business needs, plus a premium for working one of the few slots available outside normal hours. A flat multiplier pulled from habit usually undercharges for the risk of a late night gas leak or carbon monoxide check, leaving the gasfitter working unsociable hours for ordinary margin.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

  • Data first coaching
  • Your nights back
  • Every job priced to make money
  • 9,000+ owners trained
  • Greg is the only coach
  • 20 years in trade, 10 coaching
  • Beat 9pm
  • Places are limited
Greg on videoDecember has half the billable days so double your prices

By Greg Allan, tradesman and creator of Data First Coaching

Why does a flat afterhours multiplier not protect a gasfitter's margin?

A flat afterhours multiplier, say time and a half pulled from habit, treats every late callout the same whether it is a cooktop that will not light or a gas leak that has the homeowner standing on the front lawn. It does not account for how few of those slots exist in a gasfitter's week compared with daytime service work. The price should reflect how scarce that hour is, not just how inconvenient it feels to answer the phone.

Most gasfitters set their afterhours rate once, early on, and never revisit it. The daytime rate gets reviewed when material costs climb or the licence renewal comes around, but the emergency number sits untouched. Over time it drifts away from what that hour is actually worth, and the gasfitter is carrying compliance risk and carbon monoxide exposure for a price set years before the business looked anything like it does now.

What does an afterhours callout really cost a gasfitter?

The real cost of a late night callout is wages at the loaded rate, vehicle running cost, the overheads that still sit on the business whether the van moves or not, and the margin the gasfitter needs to keep the business healthy. Guessing at this number is risky on any job, but it is most expensive on the hours that carry the highest stakes: a suspected gas leak, a carbon monoxide check, a flue that looks wrong at a glance.

A pressure test or a leak detection callout late at night is not the same job as a daytime appliance install. It demands more care, carries more liability if something is missed, and often means the gasfitter is working alone without the usual backup of a quiet office day to sort paperwork or chase a compliance certificate. If the afterhours number does not reflect that, the business is absorbing the risk for free.

How do you price a callout like scarce capacity, not inconvenience?

You price it the way any high demand window gets priced: the price rises because the slots are limited, not because the customer is being punished for calling after dark. A gasfitter has a fixed, small number of afterhours hours each week set against daytime hours that stretch much further, so those hours should carry a premium that reflects how little of them there is to sell.

Think of it the way a plumber thinks about the week before Christmas, when every hot water system in the street seems to fail at once. The jobs do not get easier, the gasfitter does not get more hours in the day, so the price has to carry the weight instead. The same thinking applies to the gasfitter called at night for a gas leak, a safety check on a new install, or a cooktop fault on a natural gas or LPG system. The scarcity is real every week, not just at Christmas.

What should sit inside your callout number?

Your callout number should bundle labour, materials, the regulator or bayonet fitting if one is needed, and the afterhours premium into one clear price for the job, built around the gross profit margin you need to protect. That bundled price is harder for a customer to argue down against a mate's hourly rate, because there is nothing simple to compare it to.

Gross profit margin is the number to know here, not a calculation to chase once a month in the books. It is the number that tells you, in the moment you quote a late night servicing call, whether the price in front of the customer actually leaves the business better off for having answered the phone. A gasfitter who checks that margin at the point of quoting, rather than discovering it weeks later on a spreadsheet, stops afterhours work from quietly eroding the business.

How do you turn an afterhours quote into a booked job?

You present the customer with options, not a bare number read down the phone. A good, better, best shape, for example a standard repair, a repair plus a safety check on the rest of the gas line, and a full appliance service with a fresh compliance certificate, gives the customer something to choose from rather than a single price to accept or reject. The call ends with a booked time, not a quote left sitting in an inbox overnight while the leak keeps leaking.

This matters more at eleven at night than it does at eleven in the morning. A customer standing next to a gas appliance that will not shut off wants a decision made quickly, and a clear set of options closes that decision faster than a single flat figure ever will.

Where do AI agents fit into pricing and booking callouts?

AI agents, software that does a job the way you would, using your prices, your wording and your rules, can hold your afterhours pricing consistently so it never depends on whoever answers the phone at midnight. One agent can quote the good, better, best options the moment the callout request comes in, using your real cost and margin, not a guess made half asleep.

This is data first thinking: the price comes from your own numbers, not from memory of what felt fair the last time someone called about a gas leak. A second agent can hold the job's compliance paperwork, the servicing history and the flue or hot water system details ready, so the gasfitter arrives with the picture already built rather than piecing it together on the doorstep. AI agents do not replace the gasfitter's judgement on site. They make sure the pricing, the paperwork and the booking are already sorted before the van leaves the yard.

How does Data First Coaching approach this?

Data First Coaching starts by looking at what a gasfitter's own numbers say about afterhours and callout work: the real cost of those hours, the margin they actually return once wages, vehicle and compliance cost are counted, and how that compares with daytime servicing. The Trade Business Intelligence reads that alongside ten years of coaching trade businesses to find where the pricing problem really starts, often well before the invoice is ever written.

Greg Allan puts it plainly: “Know your numbers. Know your overheads, your material costs, and your desired profit margin.” The how, building the pricing and the agents that hold it steady, is worked through inside the Academy, with members, because the Trade Business Intelligence is powered by every member for every member, and the Academy is built for owners who are open minded, innovative and willing to share.

Also asked

More questions owners ask.

Should a gasfitter charge the same afterhours rate for every job type?

Not necessarily. A straightforward cooktop fault and a suspected gas leak carry different risk and different urgency, and the real cost behind each differs too. The bundled price can reflect that, with the gross profit margin protected on each, rather than one flat afterhours number applied to every call regardless of what is actually involved.

Does scarcity pricing mean punishing customers who call after hours?

No. It reflects that a gasfitter has far fewer afterhours slots than daytime ones, so each one is worth more to the business, the same way any trade's busiest, most limited weeks carry higher prices. It is about protecting margin on scarce hours, not making the customer pay for calling late.

How often should a gasfitter review the afterhours callout price?

Treat it the way the gross profit margin is treated, as a number to check and protect regularly, not something set once and forgotten. Material costs, vehicle running costs and compliance requirements shift over time, so a number that worked a while ago may no longer reflect the real cost of answering that call.

Can an AI agent actually quote an afterhours callout correctly?

An agent can hold the pricing structure, the current material costs and the margin rules the gasfitter has set, and present good, better, best options consistently every time the phone rings late at night. It works from the owner's own rules, not a guess, which is why the pricing behind it needs to be right first.

Data First Coaching

Coaching That Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.