Articles

What should earthmoving business software actually do for my business?

The right test for earthmoving business software is whether it tracks machine hours, fuel, operator time, dry hire and wet hire cost against each individual job, or lets those costs blur into a general overhead figure. An earthmoving contractor can only trust the gross profit margin on a site cut, a trenching job or a bulk earthworks contract when the software holds those costs at job level, not buried in a lump sum.

Places in the Academy are limited. 9,000+ owners trained, 4.9 stars from 123 Google reviews.

  • Data first coaching
  • Your nights back
  • Every job priced to make money
  • 9,000+ owners trained
  • Greg is the only coach
  • 20 years in trade, 10 coaching
  • Beat 9pm
  • Places are limited
Greg on videoManual job documentation consumed hours we needed for actual business growth

By Greg Allan, tradesman and creator of Data First Coaching

Does my earthmoving software actually show me if a job made money?

Most earthmoving job management software can spit out an invoice and a profit and loss at the end of the month, but very few earthmoving contractors can point to one site cut or one trenching job and say with certainty what it actually cost in machine hours, fuel, operator time and tipping fees. The business can look profitable overall while individual jobs quietly lose money.

A lot of earthmoving contractors run the bobcat, the excavator and the tipper on a job without ever separating what each machine cost against what the quote assumed. Fuel gets bought in bulk and absorbed into one fuel bill. Operator wages get paid weekly, not booked against the drainage job or the site cut they worked that day. Dry hire and wet hire invoices sit in the same ledger as everything else. The business knows its turnover and its overall profit, but it cannot say which jobs carried the business and which ones were run at a loss once machine hours, fuel and tipping fees are counted honestly against each one.

Floating machines between two or three sites in a week makes this worse. A wet day can push an excavator back a day, change which site a tipper services next, and nobody goes back and corrects the job cost that was already logged.

Why is tracking machine hours and fuel against the job still happening on paper?

Because the manual way, a daily docket or a diary entry for every machine, every operator and every load to the tip, worked fine with one or two machines on the road. As a fleet grows and machines start floating between civil sites, suburban site cuts and bulk earthworks jobs in the same week, writing it all down by hand becomes a job in itself, one that is easy to fall behind on and rarely fully caught up.

Wet days make the backlog worse. A week of rain can stall three jobs at once, push servicing forward, and leave a pile of dockets to reconcile once the machines are moving again. Builders and civil customers asking for proof of machine hours before they pay an invoice add more pressure to get it right, not less.

What should earthmoving business software track first?

You should judge any system on one question before any other: does it hold machine hours, fuel, operator time, dry hire and wet hire cost against the specific job, or does it let those costs sit in a general overhead figure that never gets pulled apart. If it cannot answer that for a site cut or a bulk earthworks job, the feature list in front of you does not matter much.

This is also where gross profit margin should be checked, at the moment a job is quoted, not once a month when the bookkeeping gets done. A system that shows the true cost of the excavator, the tipper and the operator at the point the quote is built lets an earthmoving contractor see a thin margin before the job is booked, not after the invoice is sent.

Picture an earthmoving contractor whose job management software held every quote and every invoice, but never opened up its own data so the owner could see machine hours and fuel against each job in one place. The owner had been waiting six months for that access to open up, with nothing changing. Rather than wait any longer, the owner started building the business its own system, with the job costing dashboards already working, running it alongside the old software, planning to move the crew across gradually and switch the old one off once everyone was comfortable using the new one.

Is there one best software system for an earthmoving contractor?

No single off the shelf system fits every earthmoving contractor, because no two operations run the same mix of site cuts, trenching, bulk earthworks, rock breaking, dry hire and civil subcontracting. A system built for a contractor with two machines doing suburban site cuts is rarely the one that fits a contractor floating three machines across drainage jobs for builders and civil customers.

Some off the shelf tools suit some earthmoving contractors well, particularly for straightforward dry hire billing or simple scheduling, and the business's own data usually shows which of those are worth keeping. Instead of renting one more generic trade package and bending the business to fit it, an earthmoving contractor can also choose to have systems built around how their own jobs actually run and how their civil and builder customers actually buy.

Where do AI agents fit into an earthmoving contractor's systems?

An AI agent is software that does a piece of office work the way you would do it yourself, using your prices, your wording and your rules. For an earthmoving contractor, that can mean an agent that checks a dry hire or wet hire invoice against what was quoted for the job, or one that chases a civil customer for sign off on a variation before the excavator moves to the next site.

Because this works data first, starting from the machine hours, fuel and tipping fee records the business already has, the AI agents that get built sit around how this particular earthmoving contractor runs jobs, not a generic trade template. That is where the non-billable office work goes, freeing the owner and the operators to spend more time on the actual earthworks and the customers, not on chasing paperwork.

How does Data First Coaching approach this?

Data First Coaching starts with the earthmoving contractor's own job and finance data, through the Trade Business Intelligence, rather than a list of software to go and try. Greg looks first at whether machine hours, fuel, operator time and tipping fees are actually held against each job, because that is usually where a thin gross profit margin on a site cut or a trenching job starts, not in the quote itself. Greg Allan puts it plainly: “The perfect single program doesn't really exist.” The right fit comes from the business's own numbers. The how, building and connecting the right systems for that business, is worked through inside the Academy, with members, because the Trade Business Intelligence is powered by every member who is open minded, innovative and willing to share.

Also asked

More questions owners ask.

Can earthmoving business software replace my bookkeeper or accountant?

No. Job costing software can show whether a site cut or trenching job made money, but it does not replace compliance work like GST or ABN reporting. The two do different jobs, and an earthmoving contractor usually needs both working together, not one instead of the other.

Is it worth keeping spreadsheets for machine hours while I work out what to change?

Spreadsheets can hold the business over short term, but they rely on someone typing every machine hour and fuel entry in by hand, which is the same time drain that pushes most earthmoving contractors to look for something better in the first place.

What about subcontract operators who run their own dry hire business?

A subbie's own records are theirs to keep, but the earthmoving contractor still needs the dry hire or wet hire cost from that operator held against the right job, not lumped into a general plant hire expense at the end of the month.

Does the system need to track servicing and breakdowns as well as job costs?

Servicing and downtime affect which machine is available for a job and what it actually costs to run, so a system that only tracks job revenue and misses plant servicing and breakdowns is only showing half the picture an earthmoving contractor needs.

Data First Coaching

Coaching That Starts From Your Data.

Data First Coaching is the trade business coaching method created by Greg Allan, founder of Tradies Success Academy. Before any advice is given, the Trade Business Intelligence Agent reads the owner's own job management and finance data, so the coaching starts from what the numbers show this week, not from what the owner can remember or explain. It finds the root cause of a problem, then puts in the system that fixes it.

How most coaching works

Most coaching starts with the owner explaining the business.

  • The first hours go on the owner describing the business to a coach.
  • The picture is out of date within weeks, because the numbers move every week.
  • So the advice treats what the owner happened to notice, which is usually a symptom.
  • Too often it comes from someone who has never run a trade business, or has only just started one.
  • The owner pays for the explaining, then pays again when the advice does not fit.

Data First Coaching

Data first starts from your numbers, not your memory.

  • The Trade Business Intelligence Agent reads your job management and finance systems first.
  • It sees your quotes, jobs, time on site and money as they are this week, not as you remember them.
  • It finds where the problem actually starts, not where it shows up.
  • You put in the system that fixes it at the root, and the data shows whether it worked.
Typical coaching against Data First Coaching
Typical coachingData First Coaching
Where it startsYou explain the businessYour own job and finance data
How current it isAs at the last meetingUpdated as your numbers change each week
What it fixesThe symptom you noticedThe root cause the data shows
Who coaches youOften someone who has never run a trade businessGreg Allan, who built a trade business a general manager now runs
The answer to growthUsually another wageAgents on the office work, people on customers and the crew
Your softwareAnother subscription or agencyTools you build on your own data, around how you work

Fix the root cause, once

The data names the real problem, so the system you put in fixes it once instead of patching the same symptom every month.

Own your software

Build your own tools on your own data, shaped around how your jobs run and how your customers buy. Cancel the subscriptions and agencies that were never built for your business.

A more human business

Agents do the non-billable work: the quoting, invoicing, chasing and reporting. Your people spend the day on customers and the crew, so relationships get better and the team performs.

Why Greg

You speak to the owner who has already done it.

Greg built Response Electricians in Perth into a 30+ staff business with 1,950+ five-star reviews. A general manager runs it.

He has trained 9,000+ trade business owners across Australia and New Zealand.

He grew a coaching company to 35 staff, a CEO and 15 coaches, then cut it back so every owner deals with him directly.

Most coaching companies hand you to a salesperson, then to a coach who has never run a trade business. Here you get the owner.

The Academy is in demand because it works, and Greg keeps places limited on purpose so every business gets looked at properly, by him. He reads every application himself, interviews the owners who fit and only takes on owners who are building for the right reasons and give back to the group. Apply now and he'll be in touch when a place opens.

Illustration: a trade business owner standing over three office staff buried in paperwork at night.
The old way

More customers meant more people doing the computer work, and more wages nobody invoices.

Illustration: a tradesman shaking hands with a homeowner in her driveway, his phone showing jobs quoted and invoiced.
The new way

You stay with your customers and your team. The office stops landing on you.

The old way

More jobs. More paperwork. Less of the owner left.

Most trade businesses grow the same way.

More jobs means more quoting, invoicing, chasing and scheduling.

None of it gets paid for.

So the owner does it at night, after a full day on site.

Or hires an office person to do it.

The office grows. The wages grow. The margin does not.

And the owner is still the one everything waits on.

Where we take you

More work. More profit. More of you left.

The phone rings with the jobs you want, at the price you set.

You grow when you're ready, never faster than the business can carry.

Every job is priced to make money, so the busy months show up in the bank.

The best tradies in your area want to work for you, and they stay.

The chasing, the paperwork and the 9pm admin stop landing on you.

The business runs the day. You pick which parts of it you're in.

Bigger, without the headaches. Getting bigger stops meaning getting busier.

P.S.

P.S. Applying costs nothing and there is no obligation. While you wait, the Tradies App is free for trade business owners, so you can start on the lessons tonight.